E-matic PMSCF Installation And Operating Instructions
Text of E-matic PMSCF Installation And Operating Instructions
PMSCF Instructions Rev02
MODEL: PMSCF
INSTALLATION AND OPERATING INSTRUCTIONS FOR CEILING PIR SENSOR
Thank you for choosing PMSCF PIR sensor. This sensor is suitable for INDOOR use only. Please read these instruction before
installation and keep for future reference.
IMPORTANT: Installation must be performed by a skilled/competent person who is familiar with the appropriate standards and
technical requirements of the appliance and its proper installation.
PMSCF Instructions Rev02
4. Secure the cable by re-screwing the cable clamp. Fix the terminal cover back
5. Press the side springs up, hold them and mount the sensor into the ceiling hole (see Figure 3)
After finishing the fitting operation, you can adjust the detection area and working state of PIR sensor
■ OPERATION MODE:
WALK TESTING:
When the mains supply is switched on to the PMSCF, the PMSCF sensor will enter into a “WARM-UP” period for approxi
PMSCF Instructions Rev02
■ IMPORTANT:
Never attempt to remove the lens cover as this will damage the sensor and render all guarantees invalid.
■ TECHNICAL DETAILS:
Voltage:
:
:
: 220 -240VAC 50 Hz
Wattage:
:
:
: Max. 2000W incandescent bulb (resister-load) or 600W fluorescent load, LED 60W-200W (depends on
different quantity LED driver)
Detection range: 360°, radius 4.5 meters with installation height of 2.8 meters
Duration