E-matic PMFMC Instruction Manual

Text of E-matic PMFMC Instruction Manual

Flush Microwave Sensor

Instruction Manual Please read the instruction manual before installing and retain for the user/maintenance engineer for future reference.

The PMFMC is a High Frequency (5.8GHz) 360˚ occupancy detector. High frequency signals are

able to penetrate non-metallic materials such as wood, brick wall, glass, etc., but can not penetrate water or metal. High frequency sensors are less affected by temperature, airflow, wind, but humidity and vibration can often affect the performance of high frequency sensor. The sensor is more sensitive for movement at different sp

Turn the LUX adjuster fully clockwise (SUN); turn the TIME adjuster fully anti-clockwise to the

minimum (10s). • Switch on the AC supply and after a 30sec warm-up period the sensor will now be in test mode • Walk test the sensor, when the sensor receives a valid trigger signal within its detection area the lamp will turn on. If the sensor does not receive any other valid trigger signal then the light should swit

The sensitivity is poor:

o Please check if there is any metallic obstructions in front of the sensor o Check that the sensor is mounted with in the recommended mounting height o Please check if the moving orientation is correct • The sensor cannot turn off the load automatically: o Please check if there is a lot of metal in the area i.e. metal containers, walls etc. o Please check the TIME and SENS adjustments o Please che

E-matic Kitchen Appliances Owners Instructions: