modway EEI-2709 Manual 

Text of modway EEI-2709 Manual 

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3

EEI–2709 SIDE TABLE Hardware: Component: A Bolt M6x70mm x 4 1 Table Top x1 Thank you for purchasing the MODWAY SIDE TABLE! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 3

EEI–2709 SIDE TABLE STEP 1: STEP 2: Please put 1 piece of Side Frame (2) on a carpeted or padded area. Insert the tenon on Table Top (1) into the rabbet on the Side Frame (2) as shown. Carefully position the assembled Table Top (1) and Side Frame (2) as shown. Insert the tenon on Table op (1) into the rabbet on

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3

EEI–2709 SIDE TABLE STEP 3: Assembly is complete. Your side table is ready to be used now! Insert 4 pieces of Bolt (A) into pre-drilled holes on Table Top (1) through the pre-drilled holes on Side Frames (2). Use Allen Wrench (B) to tighten all the Bolts (A) clockwise until secure. Hardware & Tool required Ax4 B

modway Indoor Furnishing Owners Instructions: