M-system M2LR Instruction Manual

Text of M-system M2LR Instruction Manual

P. 1 / 6

EM-5057-A Rev.2 RTD TRANSMITTER (field- and PC-configurable) MODEL M2LR INSTRUCTION MANUAL BEFORE USE .... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If you have any problems or questions with the product, please contact M-System’s Sales Office or representatives. ■ PAC

P.  / 6

EM-5057-A Rev.2 When you program the transmitter module, two configura- tion modes are available: Field Configuration using DIP SW / control buttons, and PC Software. The internal DIP switches are used to configure input and output type. Once the module is configured, precise ranges are set up with the front control buttons using a simula- tor

P. 3 / 6

EM-5057-A Rev.2 CHECKING 1) Terminal wiring: Check that all cables are correctly con- nected according to the connection diagram. 2) DIP SW setting: Check that the switches are set to ap- propriate positions. 3) Power input voltage: Check voltage across the terminal 13 – 14 with a multimeter. 4) Input: Check that the input signal is w

P. 4 / 6

EM-5057-A Rev.2 POWER ON Amber LED Green LED Control Buttons Red LED OFF ON Blink RUN MODE LD1 LD2 LD3 A G RUN MODE LD1 LD2 LD3 G R LD1 LD2 LD3 LD1 LD2 LD3 0% INPUT CONFIGURED 100% INPUT CONFIGURED INPUT CALIBRATION MODE LD1 OUTPUT CALIBRATION MODE LD2 LD3 LD1 LD2 LD3 0% OUTPUT CONFIGURED 100% OUTPUT CONFIGURED G G R R R R G R R G Fine Adjustme

P.  / 6

EM-5057-A Rev.2 HOW TO RESET TO DEFAULT STATUS 1) Set SW2-1 to ON position, SW2-2 to OFF position. 2) Turn on the power supply to the transmitter while press- ing MODE button. 3) Wait until green light turns on at the LD1, LD2 and LD3. 4) Reset SW2-1 to OFF position. Turn off and on the power supply. LD1 LD2 LD3 A LD1 LD2 LD3 G LD1 LD2 LD3

P.  / 6

EM-5057-A Rev.2 M-SYSTEM WARRANTY M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such product was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System’s so

M-system Transmitter Owners Instructions: