kd frames Charleston Plus Platform Bed XL-TWIN Instructions

Text of kd frames Charleston Plus Platform Bed XL-TWIN Instructions

A-80-P BED RAIL (2) - 80”

A-37 REGULAR SLAT (14) - 37” A-37-C CONNECTOR SLAT (2) - 37” A-15L FOOTBOARD LEFT LEG (1) 15” A-15R FOOTBOARD RIGHT LEG (1) 15” A-40L HEADBOARD LEFT LEG (1) 40” A-40R HEADBOARD RIGHT LEG (1) 40” A-22 HEADBOARD PICKET (6) 22” H A R D W A R E L I S T 1 H-10 HEX WRENCH H-3 CROSS DOWEL 12 12 H-21 2 - 1/2” BOLT H-20 1 - 1/2” WOOD SCREW 10 All wood is from the Tulip Poplar tree which can have dark streaks in

RAIL POCKETS MUST

ALL BE ON THE SAME SIDE FRONT VIEW BACK VIEW Assemble the headboard by pushing the (7) Headboard Pickets into holes on the Headboard Bottom (A-33-HB) . Then push the Headboard Top (A-33-HT) down onto the pickets Attach the Headboard Legs (A-40-L and A-40-R) to the Headboard by pushing them onto the dowels. Be sure that the rail pockets are all facing the same side. Then use (6) 1 - 1/2” Wood Screws (H-20) to attach the Legs. 2 HEADBO

Align the Left Footboard Leg (A-15L) and

Right Footboard Leg (A-15R) so that the rail pockets are on the front. Turn the Footboard (A-33-F) so that the pocket holes are facing the front. Then push the dowels into the holes on the legs. WOOD SCREWS GO IN THESE POCKET HOLES Use a phillips screw driver to attach the Legs to the Bed End using (4) 1 - 1/2” Wood Screws (Black) (H-20). 3 RAIL POCKETS MUST ALL BE ON THE SAME SIDE A-15L A-15R FOOTBOARD ASSEMBLY

Insert Connector Slats (A-37-C) into the

pockets that have holes. Secure using 2 - 1/2” Bolts (H-21) and Cross Dowels (H-3). Leave these loose at this time. PLEASE RETIGHTEN BOLTS AFTER 30 DAYS 5 Next insert all Regular Slats (A-37), then tighten the 2 - 1/2” Bolts (H-21). H-3 H-21 6

kd frames Indoor Furnishing Owners Instructions: