Pulsar MSRK 1024 Quick Start Manual

Text of Pulsar MSRK 1024 Quick Start Manual

Buffer, switch mode power supply module

with automatic operation control. EN** Edition: 1 from 11.06.2014 Supersedes the edition: ------------

 DC 27,6V/1A uninterruptible power supply

 high efficiency 89%  low voltage ripple  battery charging and maintenance control  excessive discharging (UVP) protection  battery output full protection against short-circuit

1.2. Block diagram (fig.1)

Fig.1. Block diagram of the PSU module 1.3. Description of components and connectors PSU module. Table 1. Elements of the PSU module pcb (fig. 2). Element no. Description [1] PBAT; pins - configuration of UVP battery pro

Fig.2. View of the PSU module

1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operating parameters (tab.5) Electrical parameters (tab. 3). Mains supply 30V÷32V AC 50VA min. (e.g. AWT5172430, AWT049) Current up

- LoB output indicating battery low voltage

- OC type, 50mA max. Normal operation (UBAT >23V): L state (0V), failure (UBAT <23V): hi-Z state FBAT fuse F2A / 250V Mechanical parameters (tab. 4). Enclosure dimensions 86 x 63 x 35 (WxLxH) [mm] (+/-

10. Connect the ~ 230V AC power to the transformer. The corresponding LEDs on the PCB of the power supply module

should be ON: red AC and green AUX LED. The yellow LB LED should be ON during battery charging. 11. Check the output voltage (the PSU v

Pulsar Control Unit Owners Instructions: