Prorack K681 Fitting Instructions Manual

Text of the manual

MAX kgs (lbs)

W/P WHD Mitsubishi Mirage Space Star, 5dr Hatch 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs) Mirage, 5dr Hatch 13-15 NZ 75 kgs (165 lbs) 75 kgs (165 lbs) Mirage, 5dr Hatch 13-15 AU 75 kgs (165 lbs) 75 kgs (165 lbs) Mirage, 5dr Hatch 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs) Mirage, 5dr Hatch 16-+ AU 75 kgs (165 lbs) 75 kgs (165

Mirage Space Star, 5dr Hatch 13-15 (CN)

-345mm 360mm - 835mm 780mm - -13 -9/16ths" 14 3/16ths" - 32 7/8ths" 30 11/16ths" - Mirage, 5dr Hatch 13-15 (NZ) -345mm 360mm - 835mm 780mm - -13 -9/16ths" 14 3/16ths" - 32 7/8ths" 30 11/16ths" - Mirage, 5dr Hatch 13-15 (AU) -345mm 360mm - 835mm 780mm - -13 -9/16ths" 14 3/16ths" - 32 7/8th

First Time Installation

G Remove parts from inside the package and check. Contact your dealer if any parts are missing or damaged. G This kit fits type A, B, C and D. G These instructions show type A crossbar fitted. They also apply to type B, C and D. NOTE: Clamp images in these instructions may not be representative of the clamps in thi

G Use keys to remove covers.

G Use hex screwdriver to reverse adjusting screw 10 turns. G Press adjusting screw and pull crossbar legs out. Refer to the crossbar instructions for crossbar adjustment method. G Ensure each end of the crossbar is adjusted equally. 5

G Clamps directly to edge of roof under the

doors G Please check the front of this manual for information relating specifically to your vehicle. G Place crossbar on vehicle. Minimum recommended spacing between the bars is 700mm (27 1/2") (unless otherwise stated). G It is important to put the pads in the correct position on the ve

G Place rubber pads (supplied with fitting kit)

on the vehicle roof. Pad may vary in shape to that shown. G Make sure the pad fits into the holes underneath the foot. G Remove locking screw. 7

G Apply protective strip as shown.

Trim if required. G It is important to put the clamps in the correct position on the vehicle. G Letters refer to the part numbers stamped on clamps. G Clamp Part Number: A = 976A B = 977A G Attach clamp to each leg. NOTE; clamps may have labels showing their positions on the vehicle (For example; "Front

Other Automobile Accessories Manuals