PAX A80 Quick Setup Manual

5 5 A80 Ports 6 A80 Power On/Off Power on the terminal by pressing and holding the power button down for 3-5 seconds and then release. Power off the terminal by pressing and holding the power button down for 3 to 5 seconds and then release. ...

11 In the IP address field, input the static IP address. From the Bottom half of the screen, scroll the page up. In the Gateway field, input the gateway address. In the Network prefix length field, input the network length. In the DNS 1 field, input the DNS 1 IP address. In the DNS 2 field, input the DNS 2 IP address. To save settings and exit, select the “CONNECT” option. ...

12 Wi-Fi Manual Static Setup This section describes the Manual Static Setup. If the SSID is disabled on the access point, the terminal will not display the SSID as an available Wi-Fi network listing so it will be necessary to manually configure the terminal for a Static connection type. Perform Steps 1 through 3 in the Wi-Fi DHCP Setup section, then perform the following: If the desired Wi-Fi network is not displayed, you must manually configure the network. In the upper right- hand corner of the Wi-Fi Settings screen, select the three dots icon ( ). Then select the ...

2 1 PAX A80 Features The A80 Android Countertop Smart Terminal comes with state-of-the-art technology including: • Cortex A53 processor • 8 GB eMMC + 1 GB DDR3 • Supports one micro SD (TF card) up to 32GB. • MagStripe, EMV Chip, NFC • Dial, Ethernet, Wi-Fi, Bluetooth • PCIPTS 5.x certified • 4”, 800x400 Pixel, Capacitive Touch, Color Display • Optional Backup Battery 2 What’s in The Box ...

9 To see the available Wi-Fi networks, turn on the Local Wi-Fi option. Only local Wi-Fi networks that have the SSID enabled will be visible. To view or edit the network settings select the desired Wi-Fi network. After selecting the desired Wi-Fi network, input the Wi-Fi case sensitive password and select “Connect”. When the terminal has successfully connected to the Wi-Fi access point, the Status displays “Connected”. Select the Back icon to return to the Settings menu or to exit. ...

18 FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the body of this equipment is a label that contains among other information a product identifier. If requested, this number must be provided to the telephone company. RF Exposure I ...