oneConcept Safety-First Manual
Text of oneConcept Safety-First Manual
Sehr geehrter Kunde,
wir gratulieren Ihnen zum Erwerb Ihres Artikels. Lesen Sie die folgenden Anschluss- und
Anwendungshinweise sorgfältig durch und befolgen Sie diese, um möglichen technischen
Schäden vorzubeugen. Für Schäden, die durch Missachtung der Sicherheitshinweise und
unsachgemäßen Gebrauch entstehen, übernehmen wir keine Haftung.
• Überprüfen Sie die Lieferung auf Vollständigkeit und eventuelle Schäden hin.
Stellen Sie das Türelement
und das linke Seitenteil ne-
beneinander auf. Nehmen Sie
die letzte Stange her- aus
(falls sie montiert ist), indem
Sie die Stange leicht anheben.
An der Stelle der herausge-
nommenen Stange verbin- den
Sie das Türelement mit dem
Seitenteil. Setzen Sie die
Stange mit der Feder oben
wieder ein
2
1
C
Verbinden Sie nun die Tür
mit dem Seitenteil rechts.
Wiederholen Sie dazu die
Schritte unter Nummer
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure
caused by ignoring the items and cautions mentioned in the operation and installation in-
structions are not covered by our warranty and any liability.
• Check the equipment for completeness and damages.
• Before usage, mount the fi
Place the door and the left side
element next to each other.
Remove the last pole (if pre-
installed) by raising it slightly.
Combine the door and the
side part on the spot of the
removed door. Insert the pole
again with the spring on top.
2
1
C
Connect the door with the
right side element. Repeat the
steps of number 1.
Connect the wall fittings
with the side elements in
the same manner.
Mark two drill holes on the
wall.