SECURECOM V-4010B-1 Installation Manual
Text of SECURECOM V-4010B-1 Installation Manual
V-4010B-1 INDOOR/OUTDOOR HD
VIDEO CAMERA
Installation Guide
DESCRIPTION
Figure 1: V-4010B-1 Indoor/Outdoor HD
Video Camera
The V‑4010B‑1 is an indoor/outdoor
wired or wireless video camera
that allows you to view live and
recorded clips through the Virtual
Keypad™ app. It also allows for
motion‑triggered video clip email
notifications. To activate the
camera, you need an active Dealer
Admin account at
dealer.securecomwireless.com.
Compatibility
�
V-4010B-1 VIDEO CAMERA | DIGITAL MONITORING PRODUCTS
Figure 4: Adjust the Lens
Pan
0˚~ 360˚
Tilt
0˚~ 90˚
Rotate
0˚~ 360˚
Adjustment Nut
Hex Key
Mounting Plate
Camera Base
Figure 3: Mount Using the
V‑4000 Mounting Plate
2
The V‑4010B‑1 can be configured to communicate to the SecureCom Video server in several ways. The
option you choose depends on whether or not a DMP wireless access point (WAP) is available. The
following sections
V-4010B-1 VIDEO CAMERA | DIGITAL MONITORING PRODUCTS 3
3
ACTIVATE THE CAMERA
Once communication has been established, activate the camera on Dealer Admin. To learn how to add
an NVR in Dealer Admin, refer to the V‑4408D Installation Guide (LT‑1779) or Dealer Admin Help.
Note: Cameras that are not connected to an NVR must be assigned a static IP address or have a
DHCP reservation configured.
1.
Log in to Dealer Admin (dealer.securecomwireless.co
OUTDOOR HD VIDEO
CAMERA
Specifications
Sensor and Lens
Image Sensor
1/3” CMOS Sensor
PIR Sensor
Direction Range 97.5 feet
Video Compression
H.264, Mpeg4/M-JPEG
Resolution
720p (1280 x 960)
Frame Rate
Up to 30 frames per second
On-board Storage
64 GB Micro SD/SDXC card
Weight
Camera with stand
3.75 lbs
Network
Wireless
IEEE 802.11b/g/n;
WEP64/128 bit,
WPA/WPA2 Personal, WPS
Hardware
Power Consumption
12 VDC / Max 8 W or PoE