SECURECOM V-4020C-1 Installation Manual
Text of SECURECOM V-4020C-1 Installation Manual
V-4020C-1 INDOOR HD VIDEO
CAMERA
Installation Guide
DESCRIPTION
Figure 1: V-4020C-1 Indoor HD Video Camera
The V‑4020C‑1 is an indoor wired
or wireless video camera that
allows live view and recorded clips
through the Virtual Keypad App™,
as well as email motion‑triggered
video clip notification. To activate
the camera, you’ll need an active
dealer account at
dealer.securecomwireless.com.
Compatibility
•
Any DMP system with an
active Virtual
V-4020C-1 VIDEO CAMERA | DIGITAL MONITORING PRODUCTS
Figure 3: Mounting and Adjusting the Camera
2
The V‑4020C‑1 can be configured to communicate to the SecureCom Video server in several ways. The option
you choose depends on whether or not a DMP wireless access point (WAP) is available. The following sections
outline the step‑by‑step processes for setting up a V‑4020C‑1 camera.
Connect to V‑IP1006RR WAP
Auto Pair
1.
Verify that
V-4020C-1 VIDEO CAMERA | DIGITAL MONITORING PRODUCTS 3
3
ACTIVATE THE CAMERA
Once communication has been established, activate the camera on Dealer Admin. To learn how to add
an NVR in Dealer Admin, refer to the V‑4408D Installation Guide (LT‑1779) or Dealer Admin Help.
Note: Cameras that are not connected to an NVR must be assigned a static IP address or have a
DHCP reservation configured.
1.
Log in to Dealer Admin (dealer.securecomwireless.co
V-4020C-1 INDOOR HD
VIDEO CAMERA
Specifications
Sensor and Lens
Image Sensor
1/3” CMOS Sensor
PIR Sensor
Direction Range 32.5 feet
Video Compression
H.264, M-JPEG
Resolution
720p (1280 x 960)
Frame Rate
Up to 30 frames per second
Weight
Camera with stand
14.1 oz
Network
Wireless
IEEE 802.11b/g/n;
WEP64/128 bit,
WPA/WPA2 Personal, WPS
Hardware
Power Consumption
12 VDC / Max 8 W
Dimensions (H x W x D)
Camera with stand
2.85” x 3.60” x 5