Sealey PC300BL Manual
Text of Sealey PC300BL Manual
VACUUM CLEANER WET/DRY 30LTR
1200W/230V
MODEL NO: PC300BL
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. F
Wet and dry vacuum cleaner powered by an efficient and powerful double stage 1200W motor. Features multi-cyclonic technology which
optimises airflow ensuring best suction at all times, producing outstanding cleaning results whilst using less energy than a standard cleaner. 30ltr
Stainless steel collection drum allows longer continuous cleaning before needing to be emptied. Fitted with an integral 230V ~ 50Hz (1800W)
power outlet allowing t
Ensure the mains plug is disconnected. (fig.2.1).
4.2.2.
Undo clasps. (fig.2.2) .
4.2.3.
Lift off the top section assembly and filter assembly. Remove contents from inside the container. (fig.2.3) (fig.2.4) (fig.2.5).
4.2.4.
Check filter components are complete in the order as shown. (fig.2.6).
4.2.5.
Replace the filter assembly and top section assembly onto the container. (fig.2.7).
4.2.6.
Align up the top section with the cl
Emptying dust tank. (fig.4)
5.2.1.
Turn off cleaner and disconnect from power supply. (fig.4.2) (fig.4.3)
5.2.2.
Release side clips (fig.4.4) and lift off top assembly and filter
assembly. (fig.4.5) (fig.4.6)
5.2.3.
Carefully empty contents of cleaner body into suitable receptacle. (fig.4.7)
5.2.4.
Separate filter assembly and clean off (brush gently or shake) into
suitable receptacle. (fig.4.8)
5.2.5.
Reassemble filter and replace into cleaner body.
Sealey PC300BL Blower operation. (fig.6)
5.4.1.
Ensure machine is disconnected from power supply. (fig.6.1)
5.4.2.
Remove hose assembly from suction port. (fig.6.2)
5.4.3.
Attach hose assembly to air outlet on rear of top assembly. (fig.6.3)
5.4.4.
Connect to power supply and power on. (fig.6.4) (fig.5.5)
5.4.5.
Aim hose assembly at area to be cleared. (fig.6.6)
5.5.
Switch and auxiliary socket use. (fig.7) (fig.8)
5.5.1.
Switch operations (fig.8) :
Cleaner will not operate.
No power supply.
Check supply.
Faulty power cable, switch or motor.
Check and repair or replace faulty item.
Container full.
Empty container.
Dust comes from the motor cover.
Cartridge filter missing or damaged.
Fit or replace cartridge filter.
Reduced efficiency and increased
motor speed/vibration.
Dust container full.
Empty container.
Filter clogged.
Clean or replace cartridge filte