iroda CT-630 Instruction Manual
Text of the manual
• Read instructions before use.
• DO NOT refill, ignite, or use near open flame, heater, furnace, or
combustible materials.
• KEEP AWAY FROM CHILDREN.
• Only use high-quality butane gas.
• Be aware that the Flame Nozzle of the torch can get extremely
hot during use.
• Do not touch the nozzle during use, or before sufficient time has
passed for co
HOW TO USE THE CT-630
CONNECTING GAS CARTRIDGE TO TORCH
1. Ensure that the OPEN/CLOSE Regulator
is turned off (turned fully clockwise).
2. Place the torch head valve on top of the
Gas Cartridge valve. (Fig. 1)
3. Gently screw the Gas Cartridge into the
Torch Head. Be careful not to cross-
thread the Torch to the Cartridge.
• Connect and disconnect the Torc
1. Turn the OPEN/CLOSE Regulator counterclockwise approx.
1/2 turn to start the gas flow.
2. Press the Safety Latch and Trigger together to ignite the torch.
3. For continuous flame, slide the Hands-Free Lock to the HOLD
position. Then release the Safety Latch and Trigger.
4. To extinguish the flame, slide the Hands-Free Lock to OFF
position a
• To reduce the risk of personal injury, property damage, or damage
to your CT-630, do not attempt to repair the unit body.
TROUBLE SHOOTING
PROBLEM
PROBABLE CAUSE
HOW TO CORRECT
Cannot Press down on
the ignition
Safety latch not fully
disengaged
Slide the Hands-Free
Lock to OFF position
Does not Ignite/no flame
Empty Gas cartridge
Refill with butane fuel
This appliance may be filled with any cartridges marked
“Butane” complying with EN 417.
Warning:
-Use outdoors only or use in well ventilated areas.
-Read the instructions before using the appliance.
CAUTION:
-Accessible parts may be very hot. Keep young children
away from the appliance.
SPECIFICATIONS
Dimensions
Length
167 mm (6.6 inches)
Height
218 mm