Regency ONSCD3624 Instructions
Text of Regency ONSCD3624 Instructions
Any problems or questions call Regency Office Furniture at 1-866-816-9822
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assembl
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Hardware :
J: Allen Key
Quantity: 1
P: Insert Covers
Quantity: 8
O: 3/4” Wood Screws
(19mm)
Quantity: 23
N: Shelf Pins
Quantity: 4
R: Glides
Quantity: 4
Q: Cam Caps
Quantity: 9
K: 1.5” Long Bolts
(38mm)
Quantity: 6
L: 3/4” Short Bolts
(19mm)
Quantity: 12
S: Washers
Quantity: 6
T:
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 3 : Attach Left Side(HS-G) and Right Side(HS-H) to
Back Panel(HS-A) and Base Panel(HS-B) by inserting Cam
Pins into Cam Locks. Lock Cams (Figure 1).
STEP 4 : Insert 2 Glides(R) into each Foot Bracket(HS-D).
HS-G
HS-H
R
R
HS-D
HS-A
HS-B
STEP 5 : Attach each Foot Bracket(HS-D) by
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 10 : Use 2 Wood Screws(O) to attach each Hinge
Bracket(V) to the sides. The hinge adjustment screw on each
bracket should face toward the back of the unit.
V
V
STEP 12: Attach the Lock Latch(Y) with 2 Latch Screws(X)
and Door Stop(Z) with 1 Wood Screws(O) as shown below.
Z
Y
X
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 15A : Connect 4 Hinges(U) to Hinge Brackets(V).
STEP 15B: The screw(EA) located on Hinge Bracket(V) interlocks with the opening on Hinges(U) just as screw(EB) located on
Hinges(U) interlocks with the Hinge Bracket(V) opening. Tighten screw(EA) to secure door.
Note: The screw EB i