Comet XRC-3001-WA Manual 

Tel. +41 31 744 9000, www.comet-xray-com XRC-3001-WA, Doc.-No. 50005550 Page 1 of 13 Industrial X-Ray Cooler Manual XRC-3001-WA 3000 Watt water to air cooler ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 2 of 13 Document history Version Date Author Amendment(s) Status 12/15/2008 St. Haferl released 1.0 07/22/2010 M. Schmid Layout / Structure 07/22/2010 St. Haferl released 2.0 05/18/2011 M. Schmid Technical Details 3.0 10/30/2012 R. Moser Stor ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 3 of 13 Contents 1 Before you start 4 2 Product Description 5 3 Technical data 6 3.1 Physical dimensions 6 3.2 Performance data 6 3.3 Environmental specifications 6 3.4 Settings 6 3.5 Performance data and overview 7 4 Installation 8 4.1 Antif ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 4 of 13 1 Before you start � Read the manual before setting into operation! � Coolant: Water or water-glycol mixture (max. 1:1 water - glycol) � Power supply 230 V 50/60 Hz! � Run cooling unit always with correct coolant level otherwi ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 5 of 13 2 Product Description The cooling unit XRC-3001-WA is designed for the cooling of a water circuit. The coolant can be water or a mixture of water and antifreeze (water-glycol). Water circu- lates between the cooling unit and the heat ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 6 of 13 3 Technical data 3.1 Physical dimensions Length: 483 mm Width: 406 mm Height: 481 mm Weight: 38.5 kg without filling Coolant capacity: 4.0 l 3.2 Performance data Cooling capacity: 3000 W (∆T ≤ 11 °K) Flow rate: ≥ 5.4 l / min a ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 7 of 13 3.5 Performance data and overview Temperature difference forward - ambient Cooling capacity (in Watt) Water Drain Water Outlet Electrical Connection Water Inlet Filler Cap ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 8 of 13 4 Installation � The cooling unit must be positioned upright with sufficient clearance for air circulation (minimum clearance of 0,5m from the ventilation grid) � Connect the hoses on the cooling unit, respect the flow direction T ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 9 of 13 5 Maintenance Regularly check the water level and refill if necessary. Heat exchanger In order to achieve the maximum cooling capacity, keep the heat exchanger of the cooling unit clean. Regularly check it and if necessary clean it: ...

Tel. +41 31 744 9000, www.comet-xray.com XRC-3001-WA, Doc.-No. 50005550 Page 10 of 13 6 Outline Drawing ...