ADDAC System ADDAC104 Assembly Manual
Text of ADDAC System ADDAC104 Assembly Manual
Start by locating the 2 capacitors and solder them like shown below, notice the orientation on the pcb
print.
Tip: soldering these caps is easy, just place a dab of solder on the pad on your right (left pad if you’re
left handed) and then, with the help of a tweezer, put the capacitor in place and reflow the previously
tinned pa
ADDAC104 Assembly Guide
STEP 3:
Next locate the 4 trimmers and solder like shown below, notice the orientation on the pcb print.
STEP 4:
Next locate the 2x5 pinheader and solder it like shown below.
Next locate all 9 plastic shaft trim pots and flatten out their legs with the help of some pliers, like
shown below.
page 5
ADDAC104 Assembly Guide