ABB REU615 Applications Manual

Issued: 2010-06-11 Revision: A Product version: 3.0 © Copyright 2010 ABB. All rights reserved ...

permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license. Trademarks ABB and Relion are registered trademarks of ABB Group. All other ...

or product description and are not to be deemed as a statement of guaranteed properties. All persons responsible for applying the equipment addressed in this manual must satisfy themselves that each intended application is suitable and acceptable, including that any applicable safety or other operational requirements are complied with. In particular, any risks in ...

Communities on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the ...

Section 1 Introduction.......................................................................3 This manual........................................................................................3 Intended audience..............................................................................3 Product documentation.......................................................................4 Product documentation set.............................. ...

Applications.................................................................................43 Functions.....................................................................................44 Default I/O connections..........................................................45 Default disturbance recorder settings.....................................47 Functional di ...

sorted per function. The manual can be used to find out when and for what purpose a typical protection function can be used. The manual can also be used when calculating settings. 1.2 Intended audience This manual addresses the protection and control engineer responsible for planning, pre-engineering and engineering. The protection and con ...

Planning & purchase Engineering Installing Commissioning Operation Maintenance Decommissioning deinstalling & disposal Application manual Operation manual Installation manual Service manual Engineering manual Commissioning manual Communication protocol manual Technical manual Planning & purchase Engineering Installing Commissioning Operation Maintenance Decommissioning deinstalling & disposal Planni ...

of testing an IED in a substation which is not in service. The chapters are organized in chronological order in which the IED should be commissioned. The operation manual contains instructions on how to operate the IED once it has been commissioned. The manual provides instructions for monitoring, controlling and setting the IED. The manual also describes how to identify di ...

Document ID Modbus Communication Protocol Manual 1MRS756468 DNP3 Communication Protocol Manual 1MRS756709 IEC 60870-5-103 Communication Protocol Manual 1MRS756710 IEC 61850 Engineering Guide 1MRS756475 Installation Manual 1MRS756375 Operation Manual 1MRS756708 Technical Manual 1MRS756887 1.4 Symbols and conventions 1.4.1 Safety indication symbols The electrical warning icon indicates the presence of a hazard ...

manual. • Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary also contains definitions of important terms. • Push button navigation in the LHMI menu structure is presented by using the push button icons, for example: To navigate between the options, use and . • HMI menu paths are presented in bold, for exampl ...

PHPTOV1 3U> (1) 59 (1) Three-phase overvoltage protection, instance 2 PHPTOV2 3U> (2) 59 (2) Three-phase overvoltage protection, instance 3 PHPTOV3 3U> (3) 59 (3) Positive-sequence undervoltage protection, instance 1 PSPTUV1 U1< (1) 47U+ (1) Positive-sequence undervoltage protection, instance 2 PSPTUV2 U1< (2) 47U+ (2) Negative-sequence overvoltage protection, instance 1 N ...

instance 1 DCSXSWI1 I <-> O DC (1) I <-> O DC (1) Disconnector position indication, instance 2 DCSXSWI2 I <-> O DC (2) I <-> O DC (2) Disconnector position indication, instance 3 DCSXSWI3 I <-> O DC (3) I <-> O DC (3) Earthing switch indication ESSXSWI1 I <-> O ES I <-> O ES Tap changer position indication TPOSSLTC1 TPOSM 84M Tap changer control with voltage regulator OLATCC1 COLTC 90V ...

configurations, denoted A and B. Configuration A is preadapted for voltage and frequency-based protection schemes in utility and industrial power systems and distribution systems including networks with distributed power generation. The B configuration is designed for automatic voltage regulation of power transformers equipped with an on-load ...

• Application Configuration • Graphical Display Editor Download connectivity packages from the ABB web site http:// www.abb.com/substationautomation 2.2 Operation functionality 2.2.1 Optional functions • Arc protection (configuration A only) • Modbus TCP/IP or RTU/ASCII • IEC 60870-5-103 • DNP3 TCP/IP or serial • RTD/mA measurements and multi-purpose protection (configuration B only) 2.3 Physical hardware The IED consi ...

3 phase voltage inputs (60-210 V) 1 residual voltage input (60-210 V) 1 reference voltage input for SECRSYN1 (60-210 V) 4 binary inputs Optional RTD/mA module Optional for configuration B: 2 generic mA inputs 6 RTD sensor inputs Optional BIO module Optional for configuration B: 6 binary inputs 3 signal output contacts X000 Optional communication module See technical manual for d ...

CB condition monitoring Supervision Arc detected Autoreclose shot in progr. A070704 V3 EN Figure 2: Example of 615 series LHMI The LHMI of the IED contains the following elements: • Display • Buttons • LED indicators • Communication port The LHMI is used for setting, monitoring and controlling. 2.4.1 LCD The ...