Bailey Infi 90 INIIR01 Instruction
Text of the manual
Process Control and
Automation Solutions
from Elsag Bailey Group
E96-607
INFI-NET to INFI-NET Interface Modules
WARNING notices as used in this instruction apply to hazards or unsafe practices that could result in
personal injury or death.
CAUTION notices apply to hazards or unsafe practices that could result in property damage.
NOTES highlight procedures and contain information that assists the operator in understanding the
information contained in this instruction.
The INFI-NET® to INFI-NET interface modules provide commu-
nication links between two local or two remote INFI-NET com-
munication loops. All INFI-NET to INFI-NET interface modules
are directly upward compatible to existing Superloop interfaces.
The INNIS01 Network Interface Slave (NIS) is the front end of
every INFI-NET interface. It pro
List of Effective Pages
Total number of pages in this instruction is 92, consisting of the following:
Page No.
Change Date
Preface
Original
List of Effective Pages
Original
iii through ix
Original
1-1 through 1-9
Original
2-1 through 2-7
Original
3-1 through 3-25
Original
4-1 through 4-9
Original
5-1 through 5-8
Original
6-1 through 6-4
Origina
All components whether in transportation, operation or storage,
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with
energized parts is avoided when servicing.
Special Handling
This module use
Sommaire de Sécurité
AVERTISSEMENT
D'ORDRE
GENERAL
Environment de l'équipement
Nes pas soumettre les composantes à une atmosphère corrosive
lors du transport, de l'entreposage ou de l'utilisation.
Risques de chocs electriques lor de l'entretien
S'assurer de débrancher l'alimentation ou de prende les précau-
tions nécessaires a éviter t
Table of Contents
Page
I-E96-607A
iii
SECTION 1 - INTRODUCTION....................................................................................................1-1
INTRODUCTION...........................................................................................................1-1
INTENDED USER..........................................................
Table of Contents (continued)
Page
®
SECTION 3 - INSTALLATION (continued)
UNPACKING AND INSPECTION.................................................................................... 3-2
INIIR01 INFI-NET TO INFI-NET REMOTE INTERFACE INSTALLATION ......................... 3-2
Termination Unit/Module Configuration and Installation..............
Table of Contents (continued)
Page
SECTION 4 - OPERATING PROCEDURES (continued)
INIIT03 INFI-NET TO INFI-NET TRANSFER MODULE LEDs AND CONTROLS ...............4-6
Red/Green Status LED ..........................................................................................4-6
Bank A CPU LEDs ......................................................
Table of Contents (continued)
Page
®
APPENDIX E - INIIR01 REDUNDANT CONFIGURATIONS...................................................... E-1
INTRODUCTION ..........................................................................................................E-1
REDUNDANT CONFIGURATIONS .......................................................