Bailey Infi 90 NIAC02 Instruction

Text of the manual

Process Control and

Automation Solutions from Elsag Bailey Group E96-420 Analog Input Calibration Module (NIAC02)

WARNING notices as used in this instruction apply to hazards or unsafe practices that could result in

personal injury or death. CAUTION notices apply to hazards or unsafe practices that could result in property damage. NOTES highlight procedures and contain information that assists the operator in understanding the information contained in this instruction.

The NIAC02 Analog Input Calibration Module is required to

simultaneously calibrate all eight inputs for the IMASM02 Ana- log Input Slave Module interfaced to an NIAI02 termination module. Calibration voltages pass from the IMAMM02 and IMAMM03 Analog Master Modules or an external millivolt cali- bration source to the IMASM02 slave module. T

List of Effective Pages

Total number of pages in this manual is 23, consisting of the following: Page No. Change Date Preface Original List of Effective Pages Original iii through vi Original 1-1 through 1-5 Original 2-1 through 2-6 Original 3-1 Original 4-1 through 4-2 Original 5-1 Original A-1 Original Index-1 Original When an update is rece

All components, whether in transportation, operation or storage,

must be in a noncorrosive environment. Electrical Shock Hazard During Maintenance Disconnect power or take precautions to insure that contact with energized parts is avoided when servicing. SPECIFIC CAUTIONS Remove modules fro

Sommaire de Sécurité

® AVERTISSEMENTS D’ORDRE GÉNÉRAL Environnement de l’équipement Ne pas soumettre les composants à une atmosphère corrosive lors du transport, de l’entreposage ou l’utilisation. Possibilité de chocs électriques durant l’entretien Débrancher l’alimentation ou prendre les précautions pour éviter tout c

Table of Contents

Page I-E96-420A iii SECTION 1 - INTRODUCTION....................................................................................................1-1 OVERVIEW ..................................................................................................................1-1 INTENDED USER......................................................

List of Tables

® 1-1. Reference Documents ............................................................................................ 1-3 1-2. Glossary of Terms and Abbreviations ..................................................................... 1-4 1-3. Specifications .......................................................

1 - 1

SECTION 1 - INTRODUCTION OVERVIEW The NIAC02 Analog Input Calibration Module is required to simultaneously calibrate all eight inputs for the IMASM02 Ana- log Input Slave Module that interface to the NIAI02 termination modules. Calibration voltages pass from the IMAMM02 and IMAMM03 Analog Master Modules or an external millivolt cali

1 - 2

I-E96-420A ® FEATURES The design of the NIAC02 module, as with all INFI 90 devices, allows for flexibility in creating a process management system. Refer to the NOMENCLATURE entry of this section for the list of devices that can be used with the calibration module in an INFI 90 system. • A standard factory-wired cable connects

More Bailey Control Unit Owners Instructions: