Axis 2N Access Unit Configuration Manual

telecommunications equipment. The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years and represented a symbol of stability and ...

3/128 Content: 1. Product Overview 2. Express Wizard for Basic Settings 3. Function Licensing 4. Signalling of Operational Statuses 5. Web Interface Configuration 5.1 Status 5.2 Directory 5.3 Hardware 5.4 Services 5.5 System 6. Supplementary Information 6.1 Troubleshooting 6.2 Directives, Laws and Regulations 6.3 General Ins ...

4/128 1. Product Overview Door access system can (with addon software and/or with 2N Access Unit 2N IP ) offers you a whole setup for access controle over any whole object. intercoms Your can be equipped with a numeric keypad, so you can use it as 2N Access Unit code lock. Your can also be equipped with another RFID card ...

5/128 Tip Useful information for quick and efficient functionality. Note Routines or advice for efficient use of the device. ...

6/128 2. Express Wizard for Basic Settings LAN Connection Setting You have to know the IP address to connect to the configuration 2N Access Unit interface successfully. Automatic IP address retrieval from the DHCP server is set by default in the . Thus, if connected to a network in which a DHCP server 2N Access Unit configu ...

7/128 Firmware Update We also recommend you to update your firmware upon the first login to the . device Refer to for the latest firmware version. Press the button www.2n.cz Update Firmware in the menu to upload firmware. The device will get restarted System Maintenance / upon upload and only then the updating process wil ...

8/128 Electric Lock Switching Settings An electric door lock can be attached to the and controlled by a code 2N Access Unit from the numeric keypad. Connect the electric lock as instructed in the respective Installation Manual. Enable the switch in the Switch Enabled parameter on the Hardware / Switches / tab, set the Cont ...

9/128 3. Function Licensing only supports two licensed functions: 2N Access Unit Lift module 2N Access Unit license and 2N Access Unit – NFC license. The NFC license can only be used for the 2N version that is equipped with a 13MHz card reader. Access Unit Part No. License Name 916012 2N Access Unit NFC license 9160401 2 ...

10/128 4. Signalling of Operational Statuses 2N Access Unit generates sounds to signal changes and switching of operational statuses. Each status change is assigned a different type of tone. See the table below for the list of signals: Note Signalling of some of the above mentioned statuses can be modified; refer to the User ...