Avaya S3210R Manual 

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Reference > Print Guides > Installation print guide Installation print guide This print guides is a collection of Message Networking Help system topics provided in an easy-to-print format for your convenience. Please note that some of the topics link to tasks that are not included in the PDF file. The online system contains all Message Networ ...

Last modified 6 April, 2006 Administering the dadmin login 58 Initial administration checklist 59 Performing acceptance testing 60 2 ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Installing a new Message Networking system Installing a new Message Networking system This topic provides information on installing a new Message Networking system. See Performing software managment for information on upgrading, adding, or removing software on an existing Message Networking system. For a first-time installation, perform the l ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Installation > System installation checklist System installation checklist This installation checklist provides descriptions of the required procedures, in sequence, to use when you install an assembled, loaded, and tested (ALT) Avaya Message Networking system. The following table provides a checklist for system installation. Task Description ...

! Power requirements ! Grounding requirements 9. Unpack the system. Open boxes as instructed to save packing materials. 10. Identifying the server and components. 11. Place the chassis in the designated operating area. 12. Install the UPS and optional EBMs. S3400-H and S3210R 11. Installing the server. This includes: ! Attaching the front bezel (S3400-H) ! Installing the S3400-H or S3210R in a rack-mount or stackable setup ...

Right-to-use activations are only completed Monday through Friday between the hours of 8 a.m. and 7 p.m., EST. Make sure you have the following information available: " Business Partner name, if applicable " Order Number for Message Networking. If SMTP/MIME is purchased through Modular Messaging, you also need Order Number for Modular Messagin ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Installation > Installation prerequisites Preinstallation requirements This topic describes the requirements and prerequisites for installing a Message Networking system. This topic is intended primarily for the on-site technical personnel who are responsible for installing the system and performing initial administration and acceptance testi ...

The following test equipment and tools are recommended for all new Message Networking installations. Test equipment Use the following test equipment when you install a system: ! A volt/ohm meter. ! Two telephones that are connected through the switch or Private Branch Exchange (PBX), if the Message Networking system requires analog. The two test telephones must be placed so that you can easily see the monitor while you are using th ...

The LAN administrator must administer the corporate LAN for the messaging system. Some LANs might be administered before the on-site installation begins. Other LANs require that the administration for a new server be done at the time of installation. Note: Avaya is not responsible for the installation, administration, or test of communications between customer computers and the LAN. Site requirements This section describes physic ...

The following table lists the approximate weight, height, width, and depth of each system. For the S3210 server, add 3 inches (7.6 cm) to accommodate a rear chassis cable support bracket. If required, add 4 inches (10.2 cm) to accommodate a 356B adapter and mounting clip. For safety considerations, at least two technicians should be on site and available to mount the units. The following table lists the approximate weight, hei ...

can be gained only by service personnel or customers who have been instructed on the reasons for the restricted access and any safety precautions that must be taken. A restricted-access location also allows access to the Message Networking through the use of a tool (such as a lock and key) or other means of security. Power requirements The following ...

Note: Avaya recommends joint acceptance testing for systems integrated with switches that are not maintained by Avaya. Demarcation point for LAN connectivity The demarcation point for the LAN connection to the Message Networking server is the physical Ethernet interface on the server that connects to the corporate LAN. The customer is responsible for: ! Providing the LAN cables that connect ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Installation > Unpacking the system Unpacking the system This topic lists the required and optional hardware and software needed to successfully install and maintain a Message Networking system. Required and optional hardware and software The following table lists the required and optional hardware needed to set up a Message Networking system ...

configured, but the external cabling must be connected. You cannot mix analog board types in the same Message Networking server. Saving the packing materials Save the shipping carton and all packing materials to use in case you have to return the system to the manufacturer. If you ordered multiple systems, saving one carton and one set of packing mate ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Installation > Installing the system hardware > Identifying the server and components Identifying the server and components This topic describes the server types and key components supported for Message Networking. Identifying the server There are two server types supported for Message Networking: ! S3210R: Provided in a rack-mount configurat ...

See the following to view the components of the S3210: ! S3210 front view ! S3210 back view Top of page 16 ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Maintenance > Getting inside the chassis > S3210R front view S3210R front view (without front bezel) Top of page 1 Handles 2 Front fan 3 On/off switch 4 System reset switch 5 Power LED indicator 6 Hard disk drive LED indicator 7 USB ports 8 DVD-RW 17 ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Maintenance > Getting inside the chassis > S3210R back view S3210R back view Top of page 1 Screws for top cover 2 Power supply 3 AC power receptacle 4 On/off switch 5 Mouse connector 6 Keyboard connector 7 USB ports 8 Serial port (COM1) 9 Parallel port (not used) 10 Video connector 11 USB ports 12 LAN interface 13 Serial port (COM2) 14 Analog ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Maintenance > Getting inside the chassis > S3400-H front view S3400-H front view Top of page 1 Redundant chassis fans 2 Chassis fan retaining screw 3 System power indicator 4 Disk drive access indicator for any hard disk drive 5 System reset button 6 Power supply failure indicator 7 Power supply alarm buzzer reset switch 8 Disk drive access i ...

Home | Search Print | Back | Fwd | Close Getting Started Admin Maintenance Reference Home > Maintenance > Getting inside the chassis > S3400-H back views S3400-H back views The back view of the S3400-H server varies, depending on the type of motherboard and redundant power supply that is installed. Note the configuration that your server uses: ! S3400-H with vertically stacked power supplies and a nonintegrated video and LAN ! S3400 ...