Bailey Infi 90 IMDSM04 Instruction

Text of the manual

Process Control and

Automation Solutions from Elsag Bailey Group E96-308 Pulse Input Slave Module (IMDSM04)

WARNING notices as used in this instruction apply to hazards or unsafe practices that could result in

personal injury or death. CAUTION notices apply to hazards or unsafe practices that could result in property damage. NOTES highlight procedures and contain information that assists the operator in understanding the information contained in this instruction.

The Pulse Input Slave Module (IMDSM04) is an interface used

to bring eight separate process field signals into the Infi 90 process management system. These pulse inputs are used by master modules to monitor and control a process. This instruction explains the slave module features, specifica- tions and operation. It details the procedures

List of Effective Pages

Total number of pages in this instruction is 38, consisting of the following: Page No. Change Date Preface Original List of Effective Pages Original iii through vii Original 1-1 through 1-6 Original 2-1 through 2-6 Original 3-1 through 3-7 Original 4-1 Original 5-1 through 5-2 Original 6-1 Original 7-1 Original 8-1 Origi

All components, whether in transportation, operation or storage,

must be in a noncorrosive environment. Electrical Shock Hazard During Maintenance Disconnect power or take precautions to insure that contact with energized parts is avoided when servicing. Special Handling This module use

Sommaire de Sécurité

AVERTISSEMENTS D’ORDRE GÉNÉRAL Environnement de l’équipement Ne pas soumettre les composants à une atmosphère corrosive lors du transport, de l’entreposage ou l’utilisation. Possibilité de chocs électriques durant l’entretien Débrancher l’alimentation ou prendre les précautions pour éviter tout cont

Table of Contents

Page I-E96-308A iii SECTION 1 - INTRODUCTION....................................................................................................1-1 OVERVIEW ..................................................................................................................1-1 INTENDED USER......................................................

Table of Contents (continued)

Page ® SECTION 3 - INSTALLATION (continued) WIRING CONNECTIONS AND CABLING ....................................................................... 3-6 Wiring ................................................................................................................... 3-6 Cable Connections...................

List of Figures

No. Title Page I-E96-308A v 1-1. Infi 90 Communication Levels ................................................................................1-1 2-1. Input Circuit..........................................................................................................2-1 2-2. Module Block Diagram.............................................

More Bailey Control Unit Owners Instructions: