Bailey infi 90 IMHSS03 Instruction
Text of the manual
Process Control and
Automation Solutions
from Elsag Bailey Group
E96-322
Hydraulic Servo Module
(IMHSS03)
WARNING notices as used in this instruction apply to hazards or unsafe practices that could result in
personal injury or death.
CAUTION notices apply to hazards or unsafe practices that could result in property damage.
NOTES highlight procedures and contain information that assists the operator in understanding the
information contained in this instruction.
The IMHSS03 Hydraulic Servo Module is a valve position con-
trol module used in an INFI 90 ® system to control the speed of
a turbine. It interfaces a servo valve or an I/H converter to an
IMMFP01, IMMFP02 or IMMFP03 Multi-Function Processor
Module. The multi-function processor (MFP) module controls
the position of a steam or gas turbine
List of Effective Pages
Total number of pages in this instruction is 90, consisting of the following:
Page No.
Change Date
Preface
Original
List of Effective Pages
Original
iii through ix
Original
1-1 through 1-8
Original
2-1 through 2-10
Original
3-1 through 3-11
Original
4-1 through 4-7
Original
5-1 through 5-3
Original
6-1 through 6-15
Origi
All components, whether in transportation, operation or storage,
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with
energized parts is avoided when servicing.
Special Handling
This module u
Sommaire de Sécurité
AVERTISSEMENTS
D’ORDRE
GÉNÉRAL
Environnement de l’équipement
Ne pas soumettre les composants à une atmosphère corrosive lors
du transport, de l’entreposage ou l’utilisation.
Possibilité de chocs électriques durant l’entretien
Débrancher l’alimentation ou prendre les précautions pour éviter
tout conta
Table of Contents
Page
I-E96-322A
iii
SECTION 1 - INTRODUCTION....................................................................................................1-1
OVERVIEW ..................................................................................................................1-1
INTENDED USER......................................................
Table of Contents (continued)
Page
®
SECTION 3 - INSTALLATION (continued)
FUNCTION CODE 55 CONFIGURATION ..................................................................... 3-11
FUNCTION CODE 150 CONFIGURATION ................................................................... 3-11
SECTION 4 - CALIBRATION....................................
Table of Contents (continued)
Page
SECTION 9 - SUPPORT SERVICES...........................................................................................9-1
INTRODUCTION...........................................................................................................9-1
REPLACEMENT PARTS AND ORDERING INFORMATION .......................