Bender VMD420 Manual
Text of the manual
Voltage and frequency monitor
for monitoring of 3(N)AC systems up to 0…500 V
for undervoltage, overvoltage, underfrequency, overfrequency
Software version: D238 V2.2x
VMD420_D00137_01_M_XXEN/05.2016
Bender GmbH & Co. KG
P.O. Box 1161 • 35301 Gruenberg • Germany
Londorfer Strasse 65 • 35305 Gruenberg • Germany
Tel.: +49 6401 807-0 • Fax: +49 6401 807-259
E-Mail: [email protected] • www.bender.de
© Bender GmbH & Co. KG
All rights reserved.
Reprinting only with permission of the publisher.
Subject to change!
Photos: Bender archives
Table of Contents
3
VMD420_D00137_01_M_XXEN/05.2016
1. Important information .................................................................................... 7
1.1
How to use this manual ................................................................................. 7
1.2
Technical support: service and support .........................................
Table of Contents
4
VMD420_D00137_01_M_XXEN/05.2016
3.2.10 Erasable history memory ............................................................................ 19
3.2.11 Alarm LEDs show which relay is in the alarm state ........................... 19
3.2.12 Starting a device using a simulated alarm S.AL .................................. 19
4. Installation,
Table of Contents
5
VMD420_D00137_01_M_XXEN/05.2016
6. Technical data ................................................................................................ 51
6.1
Data in tabular form ..................................................................................... 51
6.2
Standards, approvals and certifications ...............................
1. Important information
1.1
How to use this manual
Always keep this manual within easy reach for future reference.
To make it easier for you to understand and revisit certain sections in this man-
ual, we have used symbols to identify important instructions and information.
The meaning of these symbols is explained below:
This manual has been compiled with great care. It might nevertheless contain
errors and mistakes. Bender cannot accept any liability for injury to persons or
damage to property resulting from errors or mistakes in this manual.
1.2
Technical support: service and support
For commissioning and troubleshoot
Bender GmbH, Repair-Service,
Londorfer Str. 65,
35305 Grünberg
1.2.3
Field service
On-site service for all Bender products
Commissioning, configuring, maintenance, troubleshooting of Bender
products
Analysis of the electrical installation in the building (power quality test,
EMC test, the
Bender is happy to provide training regarding the use of test equipment.
The dates of training courses and workshops can be found on the Internet at
www.bender-de.com -> Know-how -> Seminars.
1.4
Delivery conditions
Bender sale and delivery conditions apply.
For software products t