Comeup CWS-80 Instruction Manual

Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available at the time of printing. General Safety Precautions A Winch is designed to give safe and dependable service if operated according to the ...

Wire rope top layer 80 160 230 first layer 30 22 14 Lifting speed m/min top layer 18 15 9 110V 0.8 × 8 1.2 × 12 1.3 × 13 Motor kw×A 220V~240V 0.8 × 4 1.2 × 6 1.3 × 6.5 Lifting height m 23 30 24 Wire rope ψmm x M 4 x 24 4.8 x 31 5 x 25 Power cord 2.0 mm2 x 3c x 5M Switch cord 1.25 mm2 ...

2.1 ENVIRONMENT PRECAUTION WARNING ●The following environmental conditions may result in the possible causes of winch trouble. ●Low temperature below -10oC, ●In a organic chemistry or high temperature above 40oC or explosive power conditions. humidity above 90% conditions. ●In hea ...

option). When hanging, do not allow the body or load to be caught by any construction of frame, or other obstruction. Be sure to lock the hanger for extra safety. 2.4 PLUG INSERTION 2.4.1 Power core insertion Insert the power plug int ...

1)Insert the switch plug into the switch receptacle of the winch and tighten it by turning the locking ring clockwise. Be sure to hook the cord by a holder. 2)To extend the length of to switch cord EXC-0010 as an option, please adopt a switch extention cord. III. WORKING METHODS 3.1 PREPA ...

4.1 ENVIORNMENT PRECAUTION WARNING ●Pay best attention to the following instruction . Obvious mistakes in operation may result in personal inquiry or equipment damage. ●Never try to lift a load ●Never hitch a ride on the more than the rated cap. hook, sling or load being ...

●Prior to lifting. Make sure to have a precise performance of brake. If any malfunction of brake happened, stop the operation immediately. ●When load suspended ●Wire rope with one in air, it will not or more of ...

5.1 WIRE ROPE REPLACEMENT 5.1.1 Swivel hook ●Put a new wire rope through the hole of the round plate of swivel hook. ●Insert a sleeve pin through the thimble of wire rope. ●Insert a pin through the sleeve pin and bent it by a pliers. 5.1.2 Drum ●Let a new wire rope w/clamp ...

Gear lubrication is an important component in insuring the long life of your winch. The type of lubricant will have a great influence. The gear oil your winch was shipped with is Castrol Alpha Series, SP-220, a viscosity ( cSt ) is 226.14/19.5 at 40℃ ℃ ℃ ℃/100℃ ℃ ℃ ℃. Consult your local lubricant distributor on the sele ...