GemOro 2.6QTH-D Manual 

2 Ultrasonic Indicator ON/OFF Button Heater Button Timer Button Ultrasonic Button Degas Button LED Digital Display Heating Indicator ULTRASONIC DEGAS POWER DEGAS TIMER HEATER ULTRASONIC MAX TEMP HEAT ON 2.6QTH-D Viewing Window Stainless Steel Tank Cover Control Panel Durable ABS Housing ...

THE FOUR BASIC STEPS STEP 1 Connect to an electrical outlet or power source with the appropriate voltage 100-120V. Do not turn the unit on when empty or damage may occur! STEP 2 Add an appropriate mixture of tap water and either our GemOro Super Concentrate Cleaning Solution or Sparkle Pak PRO pre-measured solution packets to the water in the tank. Make certain the water/solution mixture in the tank is fi ...

4 Super Concentrate Cleaning Solution or Sparkle Pak PRO pre-measured cleaning solution packets. WARNING: Do not use flammable (alcohol based solutions, etc.), basic/alkaline (Drano, etc.) or ammonia based solutions (Mr. Clean, etc.) in your ultrasonic. Under any circumstances, NEVER TURN THE UNIT ON WHILE THE TANK IS EMPTY. Place the water/cleaning solution mixture in the tank with the solution filling the tank up to approximat ...

untreated condition. Typically, items such as gold, silver, platinum, diamonds, rubies, sapphires etc., are safe for ultrasonic cleaning. For more specific information on which stones are suitable for cleaning in an ultrasonic, we suggest you contact a gemologist or GIA (The Gemological Institute of America). Also, please reference the chart on page 13 which indicates the gemstones that may be suitable to ...

6 HELPFUL SUGGESTIONS AND PRECAUTIONS - PLEASE FOLLOW CLOSELY TO AVOID LOSS OF WARRANTY COVERAGE! • Change your solution regularly. • Clean tank regularly. • Cover your tank to avoid evaporation and lower noise levels. • Use one of the superior GemOro ultrasonic cleaning solutions mixed with water for optimal cleaning. • Operate with the proper level of water/solution mixture in the tank. • Allow adequate time for th ...

By simply turning the ultrasonic cleaner ON and OFF will cause the solution temperatures in the tank to fluctuate - rising from the cavitational energy and falling from evaporative losses when the ultrasonic cleaner is OFF. The longer an ultrasonic cleaner is ON – the hotter the solution will become and the more intense the cavitation is – the faster the solution temperature will rise. In addition, w ...

8 and make prompt arrangements for it to be returned for service. It is always wise to save your original shipping container for transporting your ultrasonic safely, but if it is not available, please be certain to properly pack to protect your ultrasonic during shipping. If upon examination of the ultrasonic by the factory, the factory determines that the ultrasonic has been damaged due to misuse, this warranty is void. (Please ...

bubbles is a relatively low energy event, it is highly localized and can and does erode metals such as stainless steel over time. The pitting seen in ultrasonic tanks caused by the collapse of bubbles produces great wear on the stainless steel tanks in ultrasonics as well as ultrasonic components and can dramatically shorten the lifetime an ultrasonic cleaner, especially its tank. Because of this reality, ...

10 and is at least functionally equivalent to the original product, (3) in the event the GemOro 2.6QTH-D Ultrasonic is no longer available or has been discontinued and warranty coverage is applicable, at the factory’s sole discretion, a substantially equivalent ultrasonic cleaner may be substituted in place of the defective GemOro 2.6QTH-D ultrasonic or (4) refund the purchase price of the product. When a product orpart is exc ...

The Following List of Chemicals Can Attack the Stainless Steel Tank and/or the Drain of Your GemOro Powerful Ultrasonics Unit: Acetic Acid (70 + degrees F) Ferrous Chloride Acetol Chloride Fluorine Acetol Bromide Freon Methyl Alcohol Hydrobromic Acid Aluminum Chloride Hydrochloric Acid Aluminum Fluoride Hydrocyanic Acid Anhydrous Ammonia Hydrofluoric Acid (70 + degrees F) Hydrofluosilicic Acid Aniline Hy ...

12 IMPORTANT - READ BEFORE CLEANING ANY TYPE OF JEWELRY Prior to using the 2.6QTH-D, always confirm if the jewelry in question may be cleaned in an ultrasonic cleaner. While some general guidelines are noted below for what may or may not be cleaned in an ultrasonic, the guidelines are not represented as being complete and are not meant to be used as your final determination as to whether or not the jewelry in question is suitabl ...

PRELIMINARY GUIDELINE FOR GEMSTONE CLEANING GEMSTONE TOUGHNESS STEAM ULTRASONIC Alexandrite excellent usually usually Amazonite poor never never Amber poor never never Amethyst good risky usually Aquamarine good usually usually Citrine good risky usually Coral fair risky risky Diamond good usually usually Emerald poor never never Garnet fair never usually Iolite fair risky risky Lapis Lazuli fair never r ...

14 GemOro Super Concentrated Cleaning Solution To obtain the best general cleaning results out of your ultrasonic, we have the solution: GemOro Ultrasonic Cleaning Solution! Economical to use, it dilutes 40 to 1 for light cleaning, 20 to 1 for heavy cleaning. Our solution is recommended for removing dirt, grease, buffing compounds, rouge, tripoli and oxides. Also used for cleaning instruments, burs, metal parts, gold and fine j ...

8” Plastic Coated Stainless Steel Tweezers Our 8” plastic coated stainless steel tweezers are a practical tool for holding jewelry in an ultrasonic tank or under a steamer for short periods of time without burning your fingers. The plastic coating also provides insulation protection to keep the jewelry from being scratched by the tweezers. Item #1736 Diamond Saver Basket Our special handheld stainles ...

Tel 800.527.0719 or 214.351.0380 Fax 800.832.9871 or 214.351.1903 www.gemoroproducts.com [email protected] [email protected] ...