Front Runner SSDS602 Fitting Instructions Manual
Text of Front Runner SSDS602 Fitting Instructions Manual
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
SSDS602
ENG
1
45 min
IMPORTANT WARNING!
Thank you for purchasing a Front Runner Deck Completion Set.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
Mitsubishi Triton (L200)
Deck Completion Set
IT IS CRITICAL THAT ALL FRONT RUNNER PR
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS TOOLS NEEDED
13MM
10MM
13MM
10MM
1 1 X Side Deck LH
2 1 X Rear Deck LH
3 1 X Rear Deck RH
4 1 X Side Deck RH
5 1 X Front Face RH
6 1 X Front Face LH
7 4 X M6 x 12 Button Head
8 4 X M6 x 12 x 1SS Flat Washer
9 4 X M6 Nyloc Nut
10 4 X 60mm Carabiner
11 2 X M6 Cage
Front Runner SSDS602 FIT AND SECURE
2
Before you start to fit the wing brackets to
the Drawer, clip the M6 Cage Nuts (Item 11)
into the Rear Corner Wings (Item 12 & 13)
supplied with SSDS602.
2.1
2.2
2.3
Using the measurements shown, measure
and mark the positions of the holes you
need to drill. Do this on both left and right
side of the loadbed.
Drill 6.5mm holes on the markings you just
made.
Slide 2 channel nuts into the track.
Center the track unde
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 4
FIT AND SECURE
2
The rear support bracket is also part of
SSWS001. Fit and secure with the fasteners
supplied with SSWS001 as shown.
10MM
2.4
2.5
2.6
When fitting the Rear Corner Wing Brackets
(Item 12 & 13) take note of the position.
Item 12 & 13 needs to be placed on the
Drawer first, followed by the corner wing
supplied with SSWS001.
Use the fasteners supplied with SSWS001
to secure
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 5
FIT AND SECURE
2
Secure the Front Faces (Item 5 & 6) to the
Wolf Box System (SSWO008) using
M6 x 12 button Heads, M6 x 12 x 1SS Flat
Washers and M6 Nyloc Nuts (Item 7, 8 & 9)
as shown.
Repeat this on the other side of the drawer.
2.7
2.8
2.9
Secure the Front Faces (Item 5 & 6) to the
Cage Nuts in the Drawer System (SSDR010)
using M6 x 12 Button Heads (Item 7)
as shown.
Repeat this on the
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 6
FIT AND SECURE
2
4MM
2.10
2.11
2.12
Fit the Side Decks (Items 1 & 4) to the
Drawer by sliding it into the C-Clips.
Position of all four Decks.
Fit the LH & RH Rear Decks (Items 2 & 3)
with M6 x 30 Countersink Screws and M6
Finishing Washers (Items 14 & 15) as shown.
15
14
3
1
4
3
2
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS 7
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
5
4
Now's the time to visit your favorite Front Runner Dealer in person or Online.
COMPLETION
3
9
3.1
Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
10mm
Congratulations! You did it. T