Front Runner LALD007 Quick Start Manual
Text of Front Runner LALD007 Quick Start Manual
Front Runner LALD007 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
front runner
LALD007
ENG
1
Thank you for purchasing Front Runner Land Rover Defender (2020-Current) Side Mount Ladder.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY A
© 2021 FRONT RUNNER VEHICLE OUTFITTERS 2
TOOLS NEEDED
FIGURE 1.1
GET ORGANIZED
1
IN THE BOX
1 1 X Ladder Side - LH
2 1 X Ladder Side - RH
3 2 X Ladder Rung ( T-Slot Rubber Both Sides )
4 2 X Ladder Rung ( T-Slot Rubber One Side )
5 1 X Ladder Top
6 1 X Ladder Support
7 6 X M6 x 16 Button Head Flange
8 6 X M6 x 12 x 1 Flat Washer
9
© 2021 FRONT RUNNER VEHICLE OUTFITTERS 3
FIT AND SECURE
2
6
7
8
9
11
2
1
2.1
2.2
2.3
Assemble the Ladder Rungs ( Item 3 & 4 )
to the Ladder Sides ( Items 1 & 2 ) using
M6 x 25 Thread Forming Screws ( Item 10 )
as shown.
Assemble Support Bracket ( Item 6 ) to
Ladder Sides ( Item 1 & 2 ) using
M6 x 16 Button Head Flange Bolts,
M6 x 12 x 1 Flat Washers and M6 Nyloc Nuts
( Items 7, 8 & 9 ) as shown.
Assemble the Ladder Top As
© 2021 FRONT RUNNER VEHICLE OUTFITTERS 4
FIT AND SECURE
2
2.4
2.5
2.6
Starting from the front ( Left Side ) of the
Plastic Trim.
Measure and mark the following distances
on the Plastic Trim.
Markings:
1 - 102mm
2 - 293mm
102mm
293mm
20mm
From the bottom of the Plastic Trim,
measure and mark to get the Centres.
Markings:
1 - 20mm
Drill 2 pilot holes using the marks you made
( Fig 2.4 & 2.5 ) with a 6mm Drill bitt.
6mm
© 2021 FRONT RUNNER VEHICLE OUTFITTERS 5
FIT AND SECURE
2
2.7
2.8
2.9
Remove the Plastic Trim by using a
Plastic Panel Tool or similar.
Remove Sealing Patch that is located
behind the plastic trim shown in Fig 2.7.
Using a 20mm Hole Saw and a suitable
surface to drill on, open the two holes
in the Plastic Trim ( Fig 2.6 ) to 20mm.
20mm
Hole
Saw
© 2021 FRONT RUNNER VEHICLE OUTFITTERS 6
FIT AND SECURE
2
2.10
2.11
2.12
Refit Plastic Trim removed in Fig 2.7.
Insert Spacer 20 x 18 & Foam Washer
( Items 12 & 13 ) into the holes Drilled earlier
Fig 2.8 into the Plastic Trim.
Fit your Land Rover Defender Side Mount
Ladder to your Roof Rack using
M8 x 25 hex Bolt, Plastic Spacer 6mm,
M8 x 16 x 1.6 Flat Washer, M8 Nyloc Nut,
( Items 19, 18, 20 & 21 ) as shown.
Do not
© 2021 FRONT RUNNER VEHICLE OUTFITTERS 7
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
Congratulations! You did it. Take a step back and admire your work!
3.1
FINISH
3
FIT AND SECURE
2
2.13
A
Adjust Ladder angle to suit vehicle s