Cisco 2811 - Voice Security Bundle Router Installing And Upgrading

Text of the manual

© 2006 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Installing and Upgrading Fans in Cisco 2811 Series Routers This document describes how to install or upgrade fans that are located internally within a Cisco 2811 series integrated services router. You need to remove

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Removing the Chassis Cover Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Warning Before working on equip

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Removing the Chassis Cover Step 1 Make sure that the router is turned off and disconnected from its power source. Warning Before opening the unit, disconnect the telephone-network cables to avoid contact with telephone-network voltages. Statement 1041 Step 2 If rack-mounting brackets

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Removing the Chassis Cover The cover should now be positioned back from the bezel about 1/4 inch (6 to 7 mm). If it is not, repeat Step a. and Step b. for one or both sides of the chassis. Step 5 Slide the cover toward the back of the chassis until it contacts a stop (about 1 inch [25

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Locating the Fan Locating the Fan Figure 4 shows the locations of the fans in a Cisco 2811 series router. Figure 4 Fan Locations in Cisco 2811 Routers Note The fan numbers in Figure 4 correllate to IOS show environment command numbers. The arrows show proper air flow. Installing and R

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Installing and Removing the Fans Removing the System Fans To remove a system fan, perform the following procedure. To complete this procedure, you may need a flat-blade screwdriver. Step 1 Locate the fans to be removed. See Figure 4 for the location of the fans. Step 2 Disconnect the

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Installing and Removing the Fans Figure 7 Using a Flat-Blade Screwdriver for Added Leverage When Removing the Fan Figure 8 shows the fan being tilted away from the chassis to remove it. Figure 8 Lifting and Tilting the Fan to Remove Step 5 Place the fan in an antistatic bag to protect

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Installing and Removing the Fans Removing the Power Supply Fan To remove the power supply fan, perform the following procedure. To complete this procedure, you may need a flat-blade screwdriver. Step 1 Locate the fan to be removed. See Figure 4 for the location of the fans. Step 2 Dis

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Installing and Removing the Fans Figure 10 Lifting the Ribbon Cable Step 4 Remove the plastic air baffle by gently squeezing the air baffle sides, disengaging the baffle from the chassis base as shown in Figure 11. Figure 11 Removing the Air Baffle Step 5 Remove the fan wire from the

Installing and Upgrading Fans in Cisco 2811 Series Routers

78-17850-01 Installing and Removing the Fans Figure 12 Using a Flat-Blade Screwdriver to Lift the Fan Step 7 Disengage the fan from the side attachment slots and push the fan toward the center of the chassis, and remove the fan as shown in Figure 13. Figure 13 Disengaging the Fan from the Side A

Other Network Router Manuals