Aqualuma GEN2 6 Series Fitting Instructions

and you will see a decal with an arrow on the primary optic holder. The arrow on the decal must be vertical, see photos** Limited Warranty (Please pass on to the vessel owner) Aqualuma warrants all of its product range with a Three (3) year warranty to be free of defects in workmanship and materials. Aqualuma warranty will be deemed void if the product is improperly maintained or as a result of misuse, neglect, improper installation or natural disasters such as fl ood, fi re, lightning or unauthorized repairs or modifi cations. Aqualuma will replace at it’ ...

All Aqualuma lights have been tested before shipping. It is recommended that you use a qualifi ed boat builder to work out placement and fi tting of your new underwater lights. You will require the following to install your new Aqualuma lights. *76mm (3”) hole saw, Wire Connectors *Fuse or Circuit Breaker Gen 2 series housings can now be installed with any sealant approved for below water line use. Step 1 With boat on hardstand or trailer calculate the spacings based on the width of the boat and the number of lights you want to fi t. (Recommended spacing is 800mm (32 in”) for transom and 250-300mm (10 in� ...