APURO CD277-A Instruction Manual

Specifications

Brand: APURO
Category: Kitchen Appliances
Model: CD277-A (Instruction Manual), przHe2UC0iIWA
File Type: PDF
File Size: —
Pages: 12 pages

Download Document

Get a high-quality, printable PDF version of this manual for offline use.

Download PDF Manual (12 pages)

⚠️ Download Safety: This PDF is completely safe to download (last scan date: 05/09/2026).

Read Online

Read the APURO CD277-A Instruction Manual online using the built-in PDF viewer.

CD277-A Instruction Manual: Key Pages of Document

Position on a flat, stable surface.

• A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product. • Consult Local and National Standards to comply with the following: • Health and Safety at Work Legislation • Fire Precautions • Wiring Regulations • Building Regulations • Always stand BEHIND the safety guard when operating the appliance. • DO NOT place hands near the blade when in use. This can result in severe injury. • DO NOT touch the blade edge. • DO NOT remove food from the appliance until the blade has come to a complete stop. � ...

Telephone Helpline: 1300 225 960

Pack Contents The following is included: Apuro prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your Apuro dealer immediately. Assembly The plastic safety guard has been removed from the appliance to prevent damage during transit. Apuro accept no responsibility for any injury caused by operation of this appliance without the guard installed or correctly fitted. 1. Fit grip handle support tube (2) over grip handle axle. Fit grip handle (1) to support tube. 2. Fit B ...

Place the meat in the cradle and secure in place with the Grip handle.

5. Switch On the power [I]. . 6. Holding the carriage and grip handles, push the carriage backwards and forwards across the blade. 7. After slicing the desired amount press the Off [O] button to turn Off the appliance. 8. Remove the sliced food from the catchment area. Note: It is important to set the Plate fixing bolt as failure to do so can result in inaccurate thicknesses when slicing. WARNING: NEVER use your hands to secure the meat when slicing. WARNING: The blade starts immediately. WARNING: The blade continues to turn for a few seconds after switching off. Note: Always d ...

Telephone Helpline: 1300 225 960

Cleaning the Blade and Cover 1. Disconnect the appliance from the power supply. 2. Push the carriage away from the blade. 3. Unscrew the blade cover release bolt. 4. Carefully lift off the blade cover 5. Attach the blade removal tool by placing it over the blade and screwing the two bolts into the corresponding holes in the blade. 6. Unscrew the 3 screws holding the blade, leaving it sat on the slicer. 7. Lift the blade off the slicer using the knobs of the blade removal tool as handles. 8. Wash the blade by wiping from the centre towards the edge. Keep the removal tool in place when cleaning. If necessary, wipe clean ...

Tighten the Sharpener release bolt to secure the sharpener.

4. Start the appliance. 5. Press and hold down the rear sharpening stone button to sharpen the blade. Do not exceed one minute of constant sharpening. 6. Release the rear stone and press down the front sharpening stone button for a few seconds to smooth the edge of the blade. 7. Turn off the appliance and return the sharpener to its original position, ensuring it is securely tightened. Lubricating the Pusher Axle 1. Push the carriage to one side and clean the axle with dry a cloth. 2. Lubricate the axle surface with grease suitable for use in food preparation areas. 3. Push the carriage b ...

Telephone Helpline: 1300 225 960

Troubleshooting Technical Specifications Fault Probable Cause Action The unit is not working The unit is not switched on Check the unit is plugged in correctly and switched on Plug and lead are damaged Call Apuro agent or qualified technician Power supply Check power supply Internal wiring fault Call Apuro agent or qualified technician Blade cover securing screw is not properly inserted Remove plate securing screw and screw back in The cradle hits the blade guard The carriage has been improperly fitted Unscrew the carriage knob, check the carriage is properly in place then replace the carriage knob The blade is not cu ...

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency

disconnection being required they must be readily accessible. Compliance The product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area. Apuro parts have undergone strict product testing in order to comply with regulatory standards and spec ...

Kitchen Appliances PDF Instructions

CS500
pass & seymour CS500
03.04.2026 8 pages

Syracuse, NY 13221 800.223.4185 Installation Instructions CS Series 360° PIR Occupancy Sensor Specifications Voltages . . . . . . . . . . . . . . . . . . . . .20–30VDC (24VDC Typical) Current Consumption . . . . . . . . . . .@24VDC, 11mA Maximum Time Adjust User guidebook for the pass & seymour CS500 Kitchen Appliances. This guide explains technical procedures for technical assistance, operating guidelines, system setup.

GC9600 SERIES
Philips GC9600 SERIES
26.07.2026 28 pages

GC9600 series Full user manual for the Philips GC9600 SERIES Iron. The document presents product maintenance, installation guides, replacement parts, startup procedures.

XP20
Janam XP20
16.06.2026 9 pages

XP Series Four-Slot Cradle Kit Quick Start Guide ™ Official user manual for the Janam XP20 PDA. This manual elaborates on system setup, setup instructions, safety guidelines.

Ventero-868
elero Ventero-868
11.08.2026 2 pages

20 www.elero.com 18 115.0101 We reserve the right to make technical changes 10/04 Commissioning Condition: The end positions of the awning have been set, a transmitter has been taught, and the Ventero-868 has been loaded (LED flashes when a key is pressed) St Device technical manual for the elero Ventero-868 Kitchen Appliances. It explains troubleshooting and interface navigation, installation procedures, maintenance, network setup.