niclimbingframes Georgia Instruction Manual
Text of niclimbingframes Georgia Instruction Manual
3” x 3” post
4
2
740mm x 3”
x 1.5”
6
3
530mm x 3”
x 1.5”
1
4
6 x 60
screws
2
740mm x 6”
x 1”
8
6
600mm x 6”
x 1”
5
7
65mm
decking
screws
Approx.
100
8
8ft Slide
1
9
Grab
handles
4
550mm x 3”
x 1.5”
2
11
790mm x 6”
x 1”
4
Tools needed:
•
Cordless drill
•
Handsaw
•
Spirit Level
•
Hammer
•
Stepladder
•
Pencil
•
Measuring tape
•
10mm Hex bit
•
PZ 2 Drill Bit
All components needed during the assembly are numbered with reference to the parts list, please
refer back to the parts list to ensure you are assembling the correct components for each step.
Step 1:
•
Secure the 530mm x 3” x 1.5” between 2 x 740mm x 3” x 1.5” boards using 65mm decking
screws and predrilling the holes beforehand.
Secure the two 740mm boards from the previous step to the 4 x 1600mm x 3” x 3” posts
using decking screws and predrilling the holes beforehand. These boards should be secured
1100mm from the bottom of the posts to allow the platform height to be 1200mm.
Secure the 5 x 600mm x 6” x 1” boards to the 740mm boards using decking screws, again,
predrill the holes to prevent the timber from splitting.
Secure 2 x 740mm x 6” x 1” boards to the inside of the base of the posts ensuring the ends
of the boards are flush with the outside of the posts. Predrill the holes and use decking
screws to secure.
Secure 2 x 740mm x 6” x 1” boards to the outside of the base of the posts ensuring the ends
of the boards are flush with the outside of the posts. Predrill the holes and use decking
screws to secure.