FSA GT1-100 Installation

& Car Detailing Spot Free Rinse Water Filter System WARNING: For correct operation of this system, it is essential to observe the manufacturer’s instructions. This System must be installed in a vertical position on a solid base or mounted vertically on a solid surface. WaterMark: The Water Filtration Housings used on this system are compliant to WaterMark Standards AS/NZS 3497 under certificate number 23247. WaterMark is the standard that is required by law for a qualified plumber in Australia to install any item on municipal town water. Installation: This system is designed for inline use and is not designed to be ...

with a 3/4” Female to Hose connector (GT19-155) NOTE: Do NOT use thread sealant on any components. Use thread tape only. Sealants can cause the housing ports to crack when they harden. Installing Pressure Gauges & Plugs Kit Contains: Opening Spanner, Pressure Gauges (If applicable), Gauge Port Bungs, Spare O-Ring Install with Gauge Plugs: The housings are supplied with a thin o-ring is a zip-lock bag. Install this o-ring into the gauge port then screw in the gauge plugs firmly without thread tape. Install with Pressure Gauges: When installing pr ...