Pulsar MSR 2012 Manual
Text of Pulsar MSR 2012 Manual
Buffer, switch mode power supply module
with technical output FAC.
EN**
Edition: 3 from 21.11.2016
Supersedes the edition: 2 from 11.05.2015
DC 13,8V/2A uninterruptible power supply
high efficiency 83%
low voltage ripple
battery charging and maintenance control
battery output full protection against short-circuit
and reverse polarity connection
jump
1.3. Description of components and connectors PSU module.
Table 1. Elements of the PSU module pcb (fig. 2).
Element no.
Description
[1]
VADJ potentiometer, DC adjustment
[2]
FBAT fuse in the battery circuit
[3]
Connectors:
+BAT - DC supply output o
- electrical parameters (tab.2)
- mechanical parameters (tab.3)
- operating parameters (tab.4)
Electrical parameters (tab. 2).
Mains supply
20V÷22V AC
50VA min. (e.g. AWT5161820, AWT037)
Current up to
2,5A max.
Power frequency
5
The buffer PSU module is to be mounted by a qualified installer, holding relevant permits and licenses
(applicable and required for a given country) for 230V/AC and low-voltage installations. The unit should be mo