Pulsar MSR 1512 Quick Start Manual

Text of Pulsar MSR 1512 Quick Start Manual

Buffer switch mode power supply module

EN* Edition: 3’rd (16 Dec 2011) Supersedes: 2’nd (12 Feb 2009) edition

DC 13,8V/1A uninterruptible power supply

• high efficiency 83% • battery charging and maintenance control • battery output full protection against short- circuit and reverse polarity connection • jumper selectable battery charge current 0,2A/0,5A

1.3. Description of components and connectors

Table 1. Elements of the PSU module pcb (refer to fig. 2). Element no. Description [1] VADJ potentiometer, voltage adjustment DC [2] FBAT fuse in the battery circuit [3] Connectors: +BAT- DC supply output of the battery (+B

- electrical parameters (tab.3)

- mechanical parameters (tab.4) - operating parameters (tab.5) Electrical parameters (tab. 3) Mains supply 18V÷22V AC 30VA min. (np. AWT150) Current up to 1,8A Power frequency 50Hz Power 21 W Efficiency 78% Output volt

As the PSU is designed for a continuous operation and is not equipped with a power-switch, therefore an

appropriate overload protection shall be guaranteed in the power supply circuit. Moreover, the user shall be informed about the method of unplugging (most frequently th

The PSU module is equipped with the discharged battery disconnection system.

4.3 Maintenance Any and all maintenance operations may be performed following the disconnection of the PSU module from the power supply network. The PSU module does not require performing a

Pulsar Control Unit Owners Instructions: