Pulsar MPSB12 Manual
Text of Pulsar MPSB12 Manual
PSB 13,8V automation module
Edition: I (08 Mar2012)
EN*
Features:
•
battery status control
•
works with PSB 13,8V power supply units
•
LED indication
•
FAC technical output indicating AC power
collapse – OC and relay type
• FPS technical output indicating power supply
- electrical specifications (tab.2)
- mechanical specifications (tab.3)
Table 2.
Supply voltage
13,8V DC
Current consumption
40mA max.
Voltage of low battery indication
U<11,5V +/- 3%
Technical outputs:
- FAC; output indicating AC power
failure
- FPS; output indicating DC
absence/PSU failure
-FLB output indicating low battery
vo
The shock protection circuit shall be performed with a particular care, i.e. the yellow and green
wire coat of the power cable shall stick to one side of the ‘PE’ terminal. Using the PSU without a
properly made and fully operational shock protection circuit is UNACCEPTABLE! It can cause a
device failure or an electric shock.
7. Connect load/loads to pr
Any and all maintenance operations may be performed following the disconnection of the PSU from the power
supply network. The PSU does not require performing any specific maintenance measures. However, in case of a thick
dust layer, clean the PSU with compressed air.
WEEE MARK
According to the EU WEE Directive –