Robin Actor 3 ST Operation & User’s Manual
Text of the manual
Table of contents
1. Safety instructions..........................................................................................................3
2. Fixture exterior view ......................................................................................................5
3. Installation..................................................................
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR ROBIN Actor 3 ST !
Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to en-
sure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
Air vents and slots in the fixture´s head and base are provided for ventilation, to ensure reliable operation of
the device and to protect it from overheating.
Do not block the LEDs array with any object when the fixture is under operation.
The openings should never be covered with cloth or other materials, and never must be blocked.
This fixture should n
2. Fixture exterior view
5 - Apertures for safety chain
6 - DMX out
7 - DMX in
8 - PowerCon socket
9 - Fuse holder
10 - Apertures for quick-turn
fasteners
1 - Moving head
2 - Tilt lock
3 - Control buttons
4 - Display
Fixtures must be installed by a Qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
3.1 Connection to the mains
For protection from electric shock, the fixture must be earthed!
The Robin Actor 3 ST is equipped with auto-switching power supply that automatically a
3.2 Installing the top hat and barndoors
Switch off the fixture before top hat and barndoors installation
To install the top hat
1.Unscrew the four fastening screws (3) which securing flange (4) to the head (5) and install new flange. Keep
its right position- the cutouts (A) in the flange must look towards the arms.
Original flange
New flange
2.Place t
To install the barndoors and diffuser
1. Unscrew the four fastening screws (2) which securing flange (1) to the head and screw the new flange (3).
Keep its right position- the cutouts (A) in the flange have to look towards the fixture arms.
2. Put the barndoors holder (4) on the head in this way that pins (D) have to be in slots (B) in the flange (3) , pre