Robin actor 12 Operation & User’s Manual
Text of the manual
Table of contents
1. Safety instructions..........................................................................................................3
2. Fixture exterior view ......................................................................................................5
3. Installation..................................................................
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR ROBIN Actor 12 ST !
Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to en-
sure a safe operation, it is absolutely necessary for the user to follow the safety instructions an
Air vents and slots in the fixture´s head and base are provided for ventilation, to ensure reliable operation of
the device and to protect it from overheating.
Do not block the LEDs array with any object when the fixture is under operation.
The openings should never be covered with cloth or other materials, and never must be blocked.
This fixture should n
2. Fixture exterior view
5 - Apertures for safety chain
6 - DMX out
7 - DMX in
8 - PowerCon socket
9 - Fuse holder
10 - Apertures for quick-turn
fasteners
1 - Moving head
2 - Tilt lock
3 - Control buttons
4 - Display
Fixtures must be installed by a Qualified electrician in accordance with all
national and local electrical and construction codes and regulation.
3.1 Connection to the mains
For protection from electric shock, the fixture must be earthed!
The Robin Actor 12 ST is equipped with auto-switching power supply that automatically a
3.2 Installing the top hat
Switch off the fixture before top hat installation
1.Unscrew the four fastening screws (3) which securing flange (4) to the head (5) and install new flange. Keep
its right position- the cutouts (A) in the flange must look towards the arms.
Original flange
New flange
2.Place the top hat (1) on the head (5), press locks (2) an
3.3 Installing the eggcrate
Switch off the fixture before top hat installation
1. Unscrew the four fastening screws (1) which securing top flange (2) to the head (7) and remove both flange
and transparent plastic cover (3) from the head.
2. Unscrew the three fastening screws (4) which securing black eggcrate (5) to the zoom module (6) and
remove it.
3.
3.3 Rigging the fixture
The overhead installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope. This secondary safety attachment must be constructed in a way that no part of the installation can
fall down if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below th