Zoom ADSL X4 Operation & User’s Manual

copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form. The manufacturer does not warrant that the hardware ...

INSTALLING THE X4........................................................................................ 7 REMOVING THE X4 SOFTWARE.......................................... ...

one device. The ADSL modem gives you a connection to the Internet through your Internet service provider. The gateway/router provides an interface between the Internet and your own local network. It also includes an advanced firewall, which allows you to control Internet access ...

5 1 Installation Instructions This chapter covers the basic instructions needed to install your X4 and connect to the Internet. These instructions can be used by those with a Macintosh, Linux, or Windows operating system. If you already installed and connnected your X4 (using the separate Quick Start booklet provided for ...

The CD contains the installation software, documentation, warranty, and Customer Support information. If anything is missing or damaged, please contact Zoom Customer Support or your retailer or distributor. In addition, the package may include: • Phone-jack adapter to adapt the phone cord to a particular phone jack (certain countries ...

7 Installing the X4 Installing the X4 involves four steps: Installing the Software, Installing the Hardware, Configuring Your Web Browser, and Establishing Communication. Step 1: Installing the Software Important! This section is for Windows computers only. If you are using a Macintosh or Linux computer, or your are conne ...

4444 Click Installation Wizard. 5555 Click ADSL X4 Modem to start the software installation, then click Next when prompted. 6666 When the installation is complete, click Finish. 7777 Close any applications that may be open, then remove the CD from the CD-ROM drive. 8888 Shut down the computer. Congratulations! You have installed the so ...

9 Step 2: Installing the Hardware 1111 Shut down your computer (if it is not shut down already). 2222 Connect the modem to the computer’s Ethernet jack or to a network device (such as a hub). If you are using a Windows computer, you also have the option of connecting your computer’s USB port. However, we recommend tha ...

3333 Plug the included X4 power cube into a power strip or wall outlet, and then into the modem’s power (PWR) jack. Important! Only use the power cube shipped with the X4. Other power cubes may damage your hardware. 4444 Turn the modem on by using the ON/OFF button at the back of the modem. The PWR light on the front panel of the mo ...