Tapmaster 1750 Installation Instructions

Tapmaster. The valve blocks are connected in-line on the hot and cold water supplies with 3/8” compression fittings and the kick plate is mounted on the cabinet toe kick with the control tubing routed in between them. The Model 1740 and 1742 come with one valve block and are generally used ...

be routed through the base of the kick plate as in Figure 1, or through the kick plate end cap as in Figure 2. It is recommended the kick plate be posi- tioned as to be aligned with the center of the faucet/ sink. CONTROL TUBING ROUTED THROUGH KICK PLATE BASE (Figure 1) STEP #1 - Drill a 1/2” to 2” ...