Motorola XiR Series Quick Reference Card

Mobile Radios Quick Reference Card (Display) Radio Controls Record your radio’s programmable button functions in the blanks provided. SP represents Short Press, LP represents Long Press. Menu Navigation Buttons P1 OK P2 P3 P4 CH+ BACK MENU CH - 1 2 5 4 8 7 3 6 12 11 9 10 On/Off Button Volume Knob Front Button P1 (Programmable) ...

radio’s display. Call Icons The following icons appear on the radio’s display during a call. Sent Items Icons The following icons appear at the top right corner of the radio’s display in the Sent Items folder. LED Indicators Blinking red – Radio has failed the self-test upon powerin ...

1 S to access the menu. 2 Por Q to Zone and press N to select. 3 The current zone is displayed and indicated by a . 4 Por Q to the required zone and press N to select. 5 The display shows Selected momentarily and returns to the selected zone screen. Selecting a Radio Channel, Subscriber ID, or Group ID 1 Press ...

enabled) and speak clearly into the microphone. During a Site All Call, you will not be able to use any programmed button functions until the call ends. Making a Phone Call Procedure: 1 Press the Phone Manual Dial programmable button, and then go to Step 6. OR Press S and follow the following steps. 2 Por ...

shows Call Alert Failed. Sending a Quick Text Message Press the programmed Text Messaging button and proceed to Step 3. OR Press the programmed One Touch Call button to send a predefined Quick Text message to a predefined alias or ID and proceed to Step 6. OR Follow the procedure below. 1 S to access the menu. ...

another subscriber/group alias or ID. • Select Edit to edit the message before sending it. Initiating an Emergency Call or Emergency Alert 1 Press the programmed Emergency button. The Emergency Search Tone sounds. It is temporarily muted when the radio transmits or receives voice. The tone stops when the ra ...