Hakko Electronics FX-888D Manual 

• Features adjustment mode, preset mode, and password function • Separable tip/heater design provides excellent value for money • Supports the N2 system. Model No. FX888D Power consumption 70W Temperature range 200-480ºC Temperature stability ±1ºC at idle temperature ・Station Output voltage AC 26V Dimensions 100(W)×120(H)×120(D)mm Weight 1.2kg ・Soldering Iron Power consumption 65W (26V) Tip to ground resistance <2Ω Tip to ground potential <2mV Standard tip Shape-B (No.T18-B) Heating element Ceramic heater Cord length 1.2m Total length 217mm (with B tip) Weight 46g (with ...

Packing list No.FX888 Blue-Yellow Blue-Yellow Soldering station (FX-888D), Soldering iron (FX-8801 with soldering tip type B), Iron holder (with cleaning wire, cleaning sponge), Instruction Manual *Rubber cleaner sold separately. Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery • Heater output has been increased by 30% compared to that of the conventional models HAKKO 936・937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal im ...

• Small footprint Compact station body requires a space of only 100 (W) x 120 (D) mm. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. • Simple and easy operation With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you’re not familiar with operation of machines, you can operate it without difficulty. • Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set. The highly functiona ...

• Digital display The FX-888D’s digital display makes it easy to check the set temperature at a glance. • Password function Settings can be locked using a password to prevent them from being changed unexpectedly. Of course, it is possible to restrict all setting changes or prevent users from switching to particular modes. It allows you to choose a style of usage best suited for your worksite. • Preset mode This feature is very convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape. Simply select the desired temperature from a selection of preset temperatures r ...

HAKKO FX-8802 N2 (nitrogen) gas system A space-saving N2 system. Anti-oxidation and pre-heating significantly improve solderability. —Example Configuration (N2 System) Soldering station, Iron holder, N2 gas generator, and N2 flowmeter must be purchased separately. HAKKO FX-8803 One-hand, manual-solder-feed iron ...

Soldering station and Iron holder must be purchased separately. HAKKO FX-8804 Hot tweezers —Example Configuration (Hot Tweezer System) Soldering station, cap, and Iron holder must be purchased separately. How to remove the bottom plate. 1. Press the slide lock button inward. Note Press it firmly from upward. It is easy to open by the slide lock sloping inward. 2. Open the iron holder base while pressing the slide lock. ...

T18 Series Shape BC/C T18-C05 Shape-0.5C T18-C08 Shape-0.8C T18-C1 Shape-1C T18-C2 Shape-2C ...

T18-CF15 Shape-1.5CF Tinned cut surface only T18-CF2 Shape-2CF Tinned cut surface only T18-CF3 Shape-3CF Tinned cut surface only T18-CF4 Shape-4CF ...

T18-CSF25 Shape-2.5CSF This type has good heat transfer with short tip end design, tinned cut surface ony. T18-S6 Shape-S6 Shape B T18-B Shape-B T18-BL Shape-BL T18-S4 Shape-S4 T18-SB Shape-SB ...

Shape D T18-D08 Shape-0.8D T18-D12 Shape-1.2D T18-D16 Shape-1.6D T18-D24 Shape-2.4D T18-D32 Shape-3.2D T18-DL12 Shape-1.2DL T18-DL2 Shape-2DL ...

T18-DL32 Shape-3.2DL T18-S3 Shape-S3 T18-S9 Shape-S9 Shape I T18-I Shape-I Shape J T18-BR02 Shape-0.2BR Shape K T18-K Shape-K ...