Brydge 10.2 Operation & User’s Manual

Text of the manual

Remove non-Brydge screen protectors before attaching your Brydge keyboard. This will

ensure a perfect fit and eliminate unnecessary pressure to your screen when inserted into the hinges. TO INSERT: Place your Brydge on a flat surface and set the hinges upright to 90 degrees. Insert your iPad into the hinges with the home button on the right, one si

Supprimez les protecteurs d’écran non-Brydge avant de connecter votre clavier Brydge.

Cela garantira un ajustement parfait et éliminera toute pression inutile sur votre écran lors de son insertion dans les charnières. Placez votre clavier sans fil Brydge sur une surface plane et faites pivoter les charnières à 90°. Insérez votre iPad dans

Entfernen Sie Schutzfolien, die nicht von Brydge stammen, bevor Sie Ihre Brydge-Tastatur

anbringen. Dies gewährleistet die perfekte Passform und verhindert, dass beim Einsetzen unnötiger Druck auf den Bildschirm ausgeübt wird. EINSETZEN: Legen Sie Ihr Brydge auf eine ebene Fläche und drehen Sie die Scharniere um 90 Grad nach oben. Stecken Sie Ihr

Rimuovere le protezioni dello schermo non Brydge prima di collegare la tastiera

Brydge. Ciò garantirà un adattamento perfetto ed eliminerà la pressione inutile sullo schermo quando è inserito nelle cerniere. PER INSERIRE: Porre la tastiera Brydge su una superficie piana e posizionare i cardini in verticale a 90 gradi. Inserire l’iPad nei

Retire los protectores de pantalla que no sean de Brydge antes de conectar el teclado

Brydge. Esto evitará presiones indebidas y posibles daños a la pantalla cuando se inserte en las bisagras. PARA INSERTAR: Coloque su Brydge sobre una superficie plana y ponga las bisagras en vertical a 90 grados. Inserte su iPad en las bisagras con el botón de

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-

exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operatio

Questo dispositivo contiene trasmettitori/ricevitori esenti da licenza che sono conformi agli RSS esenti da licenza per l’innovazione, la scienza e lo

sviluppo economico del Canada. Il funzionamento è soggetto alle due condizioni seguenti: (1) Il dispositivo non deve provocare interferenze. (2) Il dispositivo deve accettare qualsiasi interferenza ricevuta

Other Tablet Accessories Manuals