Argus Security SG100 Instruction Manual

ARGUS SECURITY S.R.L. - Via del Canneto, 14 - 34015 - Muggia (TS) - Italy www.argussecurity.it GENERAL DESCRIPTION The wireless optical smoke detector samples the air in the protected area. An alarm condition is raised when the detected environmental smoke quantity exceeds the alarm threshold. DETECTOR VISUAL LED INDICAT ...

1) Uninstall the battery housing cover. 2) Take out the main battery from its housing. 3) Alternate the link switch on “ON” / “1” five times. 4) Move the link switch to position “ON”. When the Wirelex program or the translator module is waiting for this device to be linked, p ...

1) Cut off the small plastic lug on the plastic blocking grip on the detector base (picture 4). 2) Install the detector onto the base. 3) Check if the detector is effectively locked! To unlock the detector from the base: 1) Insert the tip of a small screwdriver into the side hole of the supporting base (pictur ...

When a low battery condition is indicated, both, main and secondary, batteries must be changed altogether. During this procedure the linking switch must NOT be touched at all! 1) Remove the detector from its base. 2) Remove the battery cover. 3) Remove the old primary battery. 4) Remove carefully the old secondary battery with ...