Creative Playthings Bridgehampton Premium Pack 6 Quick Start Manual
Text of Creative Playthings Bridgehampton Premium Pack 6 Quick Start Manual
BRIDGEHAMPTON PREMIUM PACK 6
BRID9WPP6-100 Rev B (07-20)
© Copyright 2018, Creative Playthings
CHILDHOOD STARTS HERE
BRID9WPP6
Bridgehampton Premium Pack 6
The components of this gym can be combined with others to create different play sets. This is the best
order of assembly to create this specific set.
Read this sheet and all instructions included with the different parts before assembly.
See the Instructions and Owner's Manual included in carton 6306
© Copyright 2018, Creative Playthings
BRIDGEHAMPTON PREMIUM PACK 6
BRID9WPP6-100 Rev B (07-20)
Page 2
• York step 12. Due to the lower clubhouse panels that will
be installed later, the Angle Braces on the back and sides
of the gym are not needed.
• York step 14. Do not install the stringer flanges.
• York step 19. Install the 9ft Beam in the position shown
above. Instructions and hardware are in the 9' Swing Beam
Leg Carton (63076-303).
• York st
BRIDGEHAMPTON PREMIUM PACK 6 BRID9WPP6-100 Rev B (07-20)
© Copyright 2018, Creative Playthings
• Mount the Tic-Tac-Toe (50514-100) and the Bubble Panel
(AP970-104) to the center front and center back of the
Bridge, respectively. Install the wall slats. Leave no gaps
larger than 3-1/2".
• Mount the Monkey Bars (63079-102) to the front of tower
2 in the position shown above.
• Assemble the Rock Climbing Wall (AH210-102Q) and
mount it to tower 2 in the
© Copyright 2018, Creative Playthings BRIDGEHAMPTON PREMIUM PACK 6
BRID9WPP6-100 Rev B (07-20)
Page 4
• Install the Skybox Play Walls (SC903-800Q) and Lexing-
ton Play Walls (SC909-800Q).
• Mount the Spiral Slide (8400-202) to the end of the Skybox
using the Spiral Slide Skybox Mount (63033-102).
• Assemble the Pinnacle Rock Wall (SH304-101Q) and
mount it to the Skybox in the position shown above.
• Mount the Access Ladder (SH946-102) and Chain Cl