Xerox Phaser 750DP Install Manual

C O L O R P R I N T E R P h a s e r S h a r e® N e t w o r k i n g S e t u p G u i d e ...

be reproduced in any form without permission of Tektronix, Inc. Tektronix ® , Phaser ® , PhaserShare ® , the TekColor logo, ColorStix ® , ColorCoat ® , and Made For Each Other ® are registered trademarks of Tek ...

iii Contents Network Printing with Tektronix Color Printers 1 Before you begin network configuration 1 The printer’s Configuration Page 2 The printer’s networking software 2 Connecting Your Printer to a Network 3 Direct Ethernet Connection to Macintosh or PC 3 The printer’s Ethernet interface 4 Token R ...

Contents Setting the IP address from the Phaser 750 front panel 23 Setting the IP address: DHCP 24 Supported DHCP fields 26 Setting the IP address: PhaserLink Printer Management Software 26 DNS (Domain Name Service) 27 EtherTalk and TokenTalk Configuration 28 Setting up the Macintosh Ethernet port for Eth ...

1 Network Printing with Tektronix Color Printers Network Printing with Tektronix Color Printers This guide provides information to help you quickly install your printer in the following environments: I Windows 95 and Windows 98 I Windows NT I Novell NetWare I EtherTalk or TokenTalk For information on installing the printer in UNIX envi ...

Network Printing with Tektronix Color Printers The printer’s Configuration Page The information supplied on the Configuration Page is helpful when you are installing and configuring the printer on a network. There are two ways to print the Configuration Page: I Use the printer’s front panel. Use this method if your printer i ...

3 Connecting Your Printer to a Network Connecting Your Printer to a Network Direct Ethernet Connection to Macintosh or PC Requirements I Two RJ-45, twisted-pair, 10Base-T cables I An Ethernet-port hub Procedure 1. Turn off your computer and the printer. 2. Connect one end of an Ethernet cable to the Ethernet port on your computer. Con ...

Connecting Your Printer to a Network The printer’s Ethernet interface I Conforms to IEEE 802.3 and Ethernet II standards. I Twisted pair (10BaseT or 100BaseTx) connection. I Thick coax (10Base5) and thin coax (10Base2) connections require adapters; contact your dealer to obtain adapters, cables, and terminators. Caution To avoid ...

5 Using the Tektronix Installer Using the Tektronix Installer Tektronix Installer for Windows The Tektronix installer for Windows is on your printer’s software CD-ROM. A single integrated installer is used to install printer drivers and other software. The Tektronix installer automatically performs printer installation tasks and cre ...