Dakota Digital BIM-22-2 Quick Start Manual

BIM-22-2 - TPMS (Tire Pressure Monitoring System) This guide is designed to get you up and running quickly with the BIM-22-2 on an HDX system. It provides a brief installation explanation as well as a step-by-step Locate procedure for finding the sensors’ positions after a tire rotation has taken place. This BIM-22-2 communicates with a TPMS Receiver Module which receives tire pressures and other information from four TPMS pressure sensors installed in a vehicle’s tires. It then provides this information for displaying on an HDX instrument system.  Do not mount the BIM-22-2 and TPMS Receiver modules in the ...

The sensors are shipped with colors painted on them to indicate which location on the vehicle they are to be installed (LF = Red, RF = Green, LR = Blue, and RR = Yellow). However, in the event a sensor is installed in an incorrect location, or when tires are rotated, the system can be taught to “locate” the sensors without the need to move sensors to different tires. This procedure will only function properly if all four TPMS sensors are mounted in tires on a vehicle.  Enter the HDX Setup menu by pressing both setup switches at the same time. The display will show the message ENTER SETUP with a progress bar. ...