Danfoss VLT Training Manual

��������������� ����������������� �������������� ...

������������������������������������������������������������������������������������������������������������������� ����� ...

Danfoss Drives VLT® Installation General Installation Danfoss Drives, VLT - Installation Startup Check List General Installation This presentation deals with the start-up of a Danfoss Drive, also known as a VLT. It is designed to help handle the start-up of ...

VLT® Installation General Installation Introduction & Objectives 1. Warning 2. Reference material 3. Pre-Installation Checks 4. Installation Checks 5. Wiring General Installation This training module covers the checks and installation for any VLT. This sec ...

Student is able to… • State the main danger and precaution to be taken when working with a VLT. • Identify the Reference Material needed for an installation and where that material may be found. • Locate and explain each of the 9 steps needed during ...

Touching the electrical parts of the VLT may be fatal. The largest models can require a significant amount of time to discharge it’s internal circuitry to a safe level after being disconnected from the incoming AC line power. Check Instruction Manual for f ...

a. Instruction Manual with each Drive Other Useful Information b. Connection Diagram c. Schematic Diagram 2) Reference Material 2) Reference Material These three pieces of reference material may be available to you when you are starting up a drive. a) The VL ...

a. Visual Inspection b. Proper Handling c. Remove IM and kits from box d. Check that VLT matches what was ordered e. Check Incoming Power, Drive and Motor that they are the same voltage range. f. Insure that all hand tools, auxiliary equipment and kits are a ...

• Make a visual inspection for damage to the drive. • Take into account the weight and size of the drive and have proper equipment to lift the drive from its container and to mount it safely. a. Inspection and b. Handling 3) Pre-Installation Checks 3) P ...

• Remove the Instruction Manual (IM) from the box; and the Accessory Kit if present. 3) Pre-Installation Checks c. Remove IM and kits 3) Pre-Installation Checks c. It is important that all extra material, such as the Instruction Manual and accessory kit b ...