Sharp PN-70HC1E Dismantle Instruction
Text of Sharp PN-70HC1E Dismantle Instruction
PN-70HC1E Dismantle Instruction
2
Table of contents
1. Scope ............................................................................................................... 3
2. Tools for dismantling............................................................................................. 3
3.
Dismantle Procedure ............................................................................................ 3
4. Back covers ................................
PN-70HC1E Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
-
Screw Driver
-
Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove the shielding
3. Remove Printed circuit boards (section 5)
4. Remove battery (section 6)
5. Dismantle LCD
PN-70HC1E Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main PWB (1pcs) Connector PWB(1pcs)
Power PWB (1pcs) IO PWB (1pcs)
T-con PWB (1pcs) OPS PWB(1pcs)
PN-70HC1E Dismantle Instruction
6
6. Batteries
This model uses CR2032 Lithium Coin battery on MAIN PWB.
Battery CR2032 can easily be removed from the battery holder.
This model uses AAA battery for remote control.
Battery can easily be removed