Viavi SmartOTDR Quick Card

E4100 Module FTTH OTDR This quick card exxplains how to connect to a fiber under test, configure FTTH mode test setups, run tests, and analyze results with a VIAVI SmartOTDR or T-BERD/MTS-2000 and 4100-series OTDR module. Equipment Requirements: • SmartOTDR or T-BERD/MTS-2000 equipped with the f ...

All fibers and connectors should be inspected prior to connection, as described on page 1. The OTDR may be connected to the FUT via an optical patch panel (OPP) bulkhead or an optical coupler as follows: Figure 3: Connecting OTDR to FUT via Coupler or OPP 1. Inspect the OTDR port on top of the test set. 2. ...

Figure 5: Home Screen 5. Tap the FTTH OTDR icon until it is selected and highlighted in yellow. 6. Press the RESULTS button to show the Results view. 7. Press the SETUP button. 8. Tap the FTTH (PON) Setup soft key to configure your GPON testing Scenario: Figure 6: FTTH (PON) Setup Screen a ...

i) 1 / 2 / 3: If you know the topology of your network under test, select 1 if you don’t have cascaded splitters; select 2 or 3 if you have a cascaded splitter topology. ii) Discover: If you do not know the network topology, select Discover. The OTDR will automatically detect ho ...

(+1 844 468 4284) To reach the VIAVI office nearest you, visit viavisolutions.com/contacts. © 2018 VIAVI Solutions Inc. Product specifications and descriptions in this document are subject to change without notice. Run Test: 1. Tap the RESULTS button. 2. Tap the START/STOP button to start the test. After a ...